Jbl basspro nano инструкция

Manual

View the manual for the JBL BassPro Nano here, for free. This user manual comes under the category subwoofers and has been rated by 5 people with an average of a 8.5. This manual is available in the following languages: English. Do you have a question about the JBL BassPro Nano?

Ask your question here

JBL BassPro Nano specifications

Below you will find the product specifications and the manual specifications of the JBL BassPro Nano.

The JBL BassPro Nano is an active subwoofer, certified with CE, that delivers a maximum RMS power output of 200 watts. With a subwoofer driver diameter of 6 inches (152mm) and a sensitivity of 12dB, it guarantees a powerful and impactful sound experience. The subwoofer diaphragm is made of fiberglass, ensuring strength and durability while maintaining a lightweight design.

Constructed with dimensions of 195mm in width, 74.6mm in height, and 260mm in depth, this subwoofer is compact and perfect for tight spaces. Weighing 3530g, it’s conveniently portable and easy to handle. The JBL BassPro Nano is an ideal subwoofer for those who prioritize sound quality and portability.

Designed for active power usage, the subwoofer can handle an RMS power output of 200 watts per channel at 4 ohms. The JBL BassPro Nano offers solid performance, conveying a rich, deep bass sound that enhances the overall audio experience. Its features and construction make it a reliable, durable, and high-quality product. If you’re looking for a compact, reliable subwoofer with enough power to impress even the most discerning audiophile, the JBL BassPro Nano might be the perfect choice.

show more

Frequently asked questions

Can’t find the answer to your question in the manual? You may find the answer to your question in the FAQs about the JBL BassPro Nano below.

Is your question not listed? Ask your question here

Basspro Nano

EN

WIRING FOR POWER AND GROUND

Remote turn-on (blue) to aftermarket stereo REM out

+12V (red)

Ground (black)

Fuse holder, 15A fuse

Chassis ground () Battery

18 (46cm)

WIRING FOR AUDIO SIGNAL

Line-level from aftermarket stereo

Right line output (from stereo)

Left line output (from stereo)

NOTE: When connecting an aftermarket stereo to the BassPro Nanos line-level inputs and remote turn-on wire, set the

button to .

Speaker-level from factory or aftermarket stereo

Right + (from stereo) Right (from stereo)

Left (from stereo) Left + (from stereo)

Harness high-level input wire guide

White/White with black stripe Left + / Left —

Gray/Gray with black stripe Right + / Right —

ABOUT THE MANUAL This manual displays general Owners Manual guideline. However, please note that proper installation of mobile audio components requires qualified experience. If you do not have the knowledge and tools to successfully perform this installation, we strongly recommend consulting an authorized JBL dealer about your installation options. Keep all instructions and sales receipts for reference.

WHATS IN THE BOX

1X

1X

1X

1X

1X

2X 4X8X

4X

MOUNTING THE BASSPRO NANO

Recommended location: under the passenger seat

NOTE: Before securing the BassPro Nano with mounting screws, check beneath the mounting surface to ensure you will not puncture fuel lines, brake lines, or any vehicle wires. Also ensure that the BassPro Nano will not interfere with seat operation or wiring, or block underseat heater/air conditioning vents.

EN

Note: When connecting a factory or aftermarket stereo to the BassPro Nanos speaker-level inputs, set the button to .

SETTING GAIN, ADJUSTING PHASE, LOW- PASS FILTER, AND BASS BOOST

1. Start with GAIN control set to minimum, and the crossover control rotated midway.

2. Choose music with substantial bass content and turn the volume control on your receiver to of its total output.

3. Adjust the GAIN control clockwise, listening carefully to the bass output. If you hear distortion, turn the GAIN control counterclockwise to decrease the GAIN.

4. Switch the PHASE back and forth to determine which setting provides the most clean bass output.

5. Adjust the LOW-PASS FILTER control until the BassPro Nano plays only low- frequency information you should not hear elements such as vocals coming from the woofer.

6. Adjust the BASS-BOOST control clockwise or counterclockwise to suit your taste.

CONNECTING THE REMOTE BASS CONTROL MODULE

SPECIFICATIONS Driver Complement: 6 x 8 (152mm x 203mm) woofer Amplifier Power Output: 100WRMS, 200W Max Frequency Response: 30 Hz 150 Hz Fuse: 15A Maximum Current Draw: 13A Quiescent Current Draw: <600 mA Input Sensitivity: 0.1 V 4.0 V low-level input; 0.25 V 10V

high-level input Crossover Frequency: 50 Hz 150 Hz Crossover Slope: 12 dB/octave Bass Boost: 0 dB to +12 dB @ 50Hz Dimensions (L x W x H): 10-1/4 x 7-11/16 x 2-15/16

(260mm x 195mm x 74.6mm) Weight: 7.78lbs. (3.53kg)

TROUBLESHOOTING

No audio and POWER indicator is off

No voltage at BATT+ and/or terminals, or bad or no ground connection. Check voltages at amplifier terminals with VOM.

No audio and indicator flashes every 4 seconds DC voltage on amplifier output. Amplifier may need service; see

enclosed warranty card for service information.

No audio and and indicators flash Voltage less than 9V on BATT+ connection. Check vehicle

charging system.

No audio and indicator is on Amplifier is overheated. Make sure amplifier cooling is not

blocked at mounting location. Or, there may be voltage greater than 16V (or less than 8.5V) on connection. Check vehicle charging system.

Amplifier fuse keeps blowing The wiring is connected incorrectly or there is a short circuit.

Check wiring connections.

Distorted audio is not set properly. Check setting. Check wires for shorts

or grounds. Amplifier or source unit may be defective.

Music lacks dynamics or punch. If using speaker-level inputs, check connections for proper

polarity. Switch back and forth between 0 and 180 and leave on setting with best sound.

Engine noisewhining or clickingin system when the engine is on Amplifier is picking up alternator noise. First, check ground

connection on the amplifier a loose or improper ground is one of the main causes for noise. Turn down . Move RCA audio cables away from power wires. Installing an alternator noise filter on power line between battery and alternator might also be necessary.

HARMAN International Industries, Incorporated 8500 Balboa Boulevard, Northridge, CA 91329 USA www.jbl.com

2019 HARMAN International Industries, Incorporated. All rights reserved. JBL is a trademark of HARMAN International Industries,

The Harman JBL Basspro Nano is an innovative compact subwoofer designed to deliver a powerful bass experience without taking up much space. This product is perfect for those who desire rich audio quality in a smaller form factor, whether they are upgrading their car audio system or looking to enhance their home entertainment setup. The JBL Basspro Nano stands out in the crowded field of subwoofers, marrying exceptional sound with convenience and aesthetic appeal.

One of the most notable features of the JBL Basspro Nano is its compact design, which allows it to fit in various spaces such as under seats or in tight corners. This is a significant advantage for users who have limited room in their vehicles or living areas but still want to enjoy an enhanced audio experience. The subwoofer is not just about size; it also packs impressive performance. Here are some key specifications that define the JBL Basspro Nano:

• Power Output: 150 watts RMS, providing sufficient power for deep bass.
• Frequency Response: 35 Hz to 150 Hz, ensuring a wide range of sound.
• Compact Size: Dimensions of 14.4 x 8.6 x 3.4 in, making it truly portable.

Another remarkable attribute of the Harman JBL Basspro Nano is its ease of installation. The product comes with all necessary mounting hardware and a user-friendly manual that guides you through the process, even for those who are not especially tech-savvy. Moreover, it features a remote level control, allowing users to adjust the bass output to their liking without having to manually adjust the amplifier settings.

Sound quality is where the JBL Basspro Nano shines the most. Users have reported a marked improvement in the depth and richness of their sound systems. Whether you’re listening to music, watching movies, or playing video games, the enhanced bass response can significantly elevate your auditory experience. The subwoofer avoids distortion even at high volumes, ensuring that every beat and sound effect resonates clearly throughout the listening environment.

The design of the JBL Basspro Nano is also commendable. The sleek and modern aesthetic not only looks good but fits seamlessly into various interior themes. The build quality reflects the brand’s commitment to durability, making it a long-lasting addition to any audio setup. Whether mounted or hidden away, the subwoofer’s appearance remains understated yet sophisticated, ensuring that it matches your style.

In conclusion, the Harman JBL Basspro Nano is an excellent investment for those serious about sound quality but who may not have the space for a traditional subwoofer. It provides powerful bass without compromising performance, versatility, or style. Here is a summary of the pros and cons:

• Pros: Compact design, great sound quality, easy installation, remote control for convenience.
• Cons: Limited low-frequency extension compared to larger models, might not suffice for bass enthusiasts looking for extreme low-end.

Overall, the JBL Basspro Nano exemplifies Harman’s dedication to producing high-quality sound equipment. It effectively caters to users who wish to improve their audio experience without requiring extensive modifications or excessive space. This product is highly recommended for anyone looking to elevate their sound experience in a compact yet powerful subwoofer.