Зингер heavy duty инструкция

How to Troubleshoot Thread Bunching on Singer Heavy Duty Sewing Machine

What size needle should I use?

Why does the needle break while sewing?

How long does a sewing needle last?

Is the manual of the Singer Heavy Duty available in English?

Производитель: Singer

4 обзора:
4.7 (Отличный товар)

Наличие:

есть

Наличие:

есть

Наличие:

есть

Наличие:

есть

Наличие:

есть

Наличие:

есть

Наличие:

есть

Наличие:

есть

You need points to download manuals.

1 point = 1 manual.

You can buy points or you can get point for every manual you upload.

Buy points

Upload your manuals

When using an electrical appliance, basic safety should always be
followed, including the following:
Read all instructions before using this sewing machine.

1. An appliance should never be left unattended when plugged in.
2. Always unplug this appliance from the electric outlet immediately

after using and before cleaning.

3.

. Replace bulb with

same type rated 15 watts

1. Do not allow to be used as a toy. Close attention is necessary

when this appliance is used by or near children.

2. Use this appliance only for its intended use as described in this

manual. Use only attachments recommended by the
manufacturer as contained in this manual.

3. Never operate this appliance if it has a damaged cord or plug, if

it is not working properly, if it has been dropped or damaged, or
dropped into water. Return the appliance to the nearest
authorized dealer or service center for examination, repair,
electrical or mechanical adjustment.

4. Never operate the appliance with any air openings blocked. Keep

ventilation openings of the sewing machine and foot controller
free from accumulation of lint, dust, and loose cloth.

5. Keep fingers away from all moving parts. Special care is required

around the sewing machine needle.

6. Always use the proper needle plate. The wrong plate can cause

the needle to break.

7. Do not use bent needles.
8. Do not pull or push fabric while stitching. It may deflect the

needle causing it to break.

9. Switch the sewing machine off («O») when making any adjustments

in the needle area, such as threading needle, changing needle,
threading bobbin, or changing presser foot, and the like.

10. Always unplug sewing machine from the electrical outlet when

removing covers, lubricating, or when making any other user
servicing adjustments mentioned in the instruction manual.

11. Never drop or insert any object into any opening.
12. Do not use outdoors.
13. Do not operate where aerosol spray products are being used or

where oxygen is being administered.

14. To disconnect, turn all controls to the off («O») position, then

remove plug from outlet.

15. Do not unplug by pulling on cord. To unplug, grasp the plug, not

the cord.

This sewing machine is intended for household use only.

DANGER

SAVE THESE INSTRUCTIONS

—

To reduce the risk of electric shock:

(110-120V area / 220-240V area).

Please turn off the machine or unplug when the machine is not
operating properly.

18. Never place anything on the foot controller.
19. If the supply cord that is fixed with foot controller is damaged, it

must be replaced by the manufacturer or its service agent or a
similar qualified person in order to avoid a hazard.

20. This appliance is not intended for use by persons (including

children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety.

21. Children should be supervised to ensure that they do not play

with the appliance.

WARNING

—

To reduce the risk of burns, fire,

electric shock, or injury to persons:

Always unplug before changing the light bulb

16. The sound pressure level under normal operating conditions is

75dB(A).

17.

IMPORTANT SAFETY INSTRUCTIONS

As the owner of a new Singer sewing machine, you are about to begin an exciting adventure in

creativity. From the moment you first use your machine, you will know you are sewing on one

of the easiest to use sewing machines ever made.

May we recommend that, before you start to use your sewing machine, you discover the many

features and the ease of operation by going through this instruction book, step by step, seated

at your machine.

To ensure that you are always provided with the most modern sewing capabilities, the

manufacturer reserves the right to change the appearance, design or accessories of this

sewing machine when considered necessary.

SINGER is a registered trademark of The Singer Company Limited or its affiliates.

© 2010 The Singer Company Limited or its affiliates. All rights reserved.

Congratulations

List of Contents

Machine Basics

Sewing

General Information

Maintenance and Troubleshooting

Principle Parts of the Machine ………………………………………………………………………………………………………………………………….2/3
Connecting Machine to Power Source………………………………………………………………………………………………………………………….4
Two Step Presser Foot Lifter/

………………………………………………………………………………………..5

Accessories………………………………………………………………………………………………………………………………………………………………6

Winding the Bobbin ……………………………………………………………………………………………………………………………………………………7
Inserting the Bobbin …………………………………………………………………………………………………………………………………………………..8
Threading the Upper Thread ……………………………………………………………………………………………………………………………………….9

Raising the Bobbin Thread ………………………………………………………………………………………………………………………………………..11

How to Choose Your Pattern……………………………………………………………………………………………………………………………………..13

Sewing Straight Stitch ………………………………………………………………………………………………………………………………………………16
Reverse Sewing/

………………………………………………………………………………………………17

Choosing Stretch Stitch Patterns ……………………………………………………………………………………………………………………………….18
Blind Hem……………………………………………………………………………………………………………………………………………………………….19

……………………………………………………………………………………………………………………………………………20

Sewing on Buttons …………………………………………………………………………………………………………………………………………………..22

Installing the Removable Extension Table …………………………………………………………………………………………………………………..23
Attaching the Presser Foot Shank ……………………………………………………………………………………………………………………………..24
Needle/Fabric/Thread Chart………………………………………………………………………………………………………………………………………25

…………………………………………………………………………………………………………………………………………….26

Inserting & Changing Needle …………………………………………………………………………………………………………………………………….27
Changing the Bulb……………………………………………………………………………………………………………………………………………………28
Troubleshooting Guide ……………………………………………………………………………………………………………………………………………..29

Adjusting Presser Foot Pressure

Automatic Needle Threader ………………………………………………………………………………………………………………………………………10

Thread Tension ……………………………………………………………………………………………………………………………………………………….12

Stitch Width Dial & Stitch Length Dial …………………………………………………………………………………………………………………………15

Removing the Work/Cutting the Thread

Sew 1-step Buttonholes

Threading the Machine

Three Needle Position Dial ……………………………………………………………………………………………………………………………………….14

Left and Right Side Balance for Buttonhole …………………………………………………………………………………………………………………21

How To Drop Feed Dog

2

1. Thread tension dial

2. Presser foot pressure adjustment

3. Thread take-up lever

4. Reverse sewing lever

5. Thread cutter

6. Presser foot

7. Needle plate cover

8. Removable extension table/ accessory storage

9. Three needle position dial

10. Bobbin stopper

11. Stitch width dial

12. Stitch length dial

13. Pattern selector dial

14. Automatic threader

15. One step buttonhole lever

14

15

1

2

3

5

6

8

7

13

11

12

10

4

9

Principal Parts of the Machine

3

16. Horizontal spool pin

17. Bobbin winding spindle

18. Hole for second spool pin

19. Handwheel

20. Buttonhole stitch balance adjustment slot

21. Power and light switch

22. Main plug socket

23. Bobbin thread guide

24. Upper thread guide

25. Face plate

26. Handle

27. Presser foot lifter

28.

29. Foot speed control

30. Power cord

Drop feed control

29

30

25

26

28

23

24

27

20

21

22

16

17

19

18

Principal Parts of the Machine

Connect the machine to a power source as illustrated. (1)
This appliance is equipped with a polarized plug which must be
used with the appropriate polarized outlet. (2)

Unplug power cord when machine is not in use.

The foot control pedal regulates the sewing speed. (3)

Consult a qualified electrician if in doubt of how to connect
machine to power source.
Unplug power cord when machine is not in use.
The foot control must be used with the appliance by KD-
1902 (110-120V area)/ KD-2902 (220-240V area)
manufactured by ZHEJIANG FOUNDER MOTOR
CORPORATION LTD. (China)
4C-316B (110-120V area)/ 4C-326G (230V area)
manufactured by Wakaho Electric Ind. Co., Ltd. (Vietnam)

Press main switch (A) to » l » for power and light.

For appliance with a polarized plug (one blade is wider than
the other). To reduce the risk of electric shock, this plug is
intended to fit in a polarized outlet only one way. If it does not
fit fully in the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician to install the proper outlet. Do
not modify the plug in any way.

Attention:

Foot control

Attention:

Sewing light

IMPORTANT NOTICE

a. Polarized attachment plug
b. Conductor intended to be grounded

2

3

4

1

A

a

b

Connecting Machine to Power Source

5

When sewing several layers or thick fabrics, the presser foot
can be raised

for easy positioning of the

work. (A)

to a higher position

A

The presser foot pressure of the machine has been pre-set
and requires no particular readjustment according to the type
of fabric (light-or-heavy weight).

However, if you need to adjust the presser foot pressure,
turn the presser adjusting screw with a coin.

For sewing very thin fabric, loosen the pressure by turning
the screw counter clockwise, and for heavy fabric, tighten by
turning it clockwise.

Two Step Presser Foot Lifter

Adjusting Presser Foot Pressure

1 Standard accessories

2 Optional accessories

Standard accessories (1)

Optional accessories (2)

a. All purpose foot
b. Zipper foot

c. Buttonhole foot

d. Button sewing foot
e. Seam ripper/ brush

f. Edge/ quilting guide

g. Pack of needles
h. Spool holders

i. Bobbin (3x)
j. L-screwdriver

k. Auxiliary Spool Pin

l. Spool pin felt

m. Soft cover

(These 10 accessories are not supplied with this machine;
they are, however, available for purchase from your authorized
retailer.)

n. Satin stitch foot
o. Overcasting foot
p. Hemmer foot
q. Cording foot

r. Blind hem foot

s. Quilting/ straight stitch foot

t. Gathering foot

u. Darning/ embroidery foot

v. Even Feed foot

w. Twin needle

o

n

p

q

r

s

t

u

v

w

006916008

006016008

006917008

0061850081

006904008

006172008

006907008

006900008

006813008

m

h

g

e

f

i

j

l

k

a

b

c

d

006806008

006905008

006914008

006Q6A0150

Accessories

6

1

2

4

7

8

9

5

6

3

10

—

corresponding

. (1/2)

— Snap thread into thread guide. (3)

— Wind thread clockwise around bobbin winder tension discs. (4)

— Thread bobbin as illustrated and place on spindle. (5)

— Push bobbin spindle to right. (6)

— Hold thread end. (7)

— Step on foot control pedal. (8)

— Cut thread. (9)

— Push bobbin spindle to left (10) and remove.

When the bobbin winder spindle is in «bobbin winding»
position, the machine will not sew and the

.

To start sewing, push the bobbin winder spindle to the left
(sewing position).

Please Note:

Place thread and

spool holder on to spool

pin

handwheel turn

Winding the Bobbin

7

Нажмите на кнопку для помощи