Стиральная машина daewoo dwf 800wp инструкция

INSTRUCTION MANUAL

■ Applying One-Touch Operation System.

■ Realizing calm washing through the innovational low-noise

design.

■ Before operating this washer, please read this instruction
completely. Thank you

Model: DWF-800WP

Full-Auto Electric Washing Machine

=

CONTENTS Page

P ARTS AND FEATURES………………………………………………………………………………………………………………………..2

WASHER SAFETY………………………………………….

………………………………………………………………………

……………..3

INSTALLATION INSTRUCTIONS……………………..

………………………………………………………………………

…………….4

ELECTRICAL REQUIREMENTS…………………………………………………………………………………………………………….5

INLET HOSE CONNECTION………………………………………………………………………………………………………………….6

OPERATING YOUR WASHER…………………………………..

………………………………………………………………………

…..7

THE FUNCTIONS OF THE CONTROL PANEL……………………………………………………………………………………….8

WASHING PROCEDURE AND PROGRAM SELECTION

……

…………………………………………………………………….

..9

GENERAL PROCEDURE FOR OPERATION………………………………………………………………………………………..11

CARING FOR YOUR WASHER…………………………

……………………………………………………………………….

…………12

HOW TO CLEAN THE FILTER………………………..

……………………………………………………………………….

…………..13

REMOVING STAINS…………………………………………………………………………………………………………………………….14

TROUBLE SHOOTING…………………………………………………………………………………………………………………………15

SPECIFICATION……………………………………………..

………………………………………………………………………..

…………16

A NOTE TO YOU

Thank you for buying a DAEWOO appliance.
DAEWOO washers are easy to use, save time, and help you manage your home better.
This manual contains valuable information about how to operate and maintain your washer properly and safely.
Please read it carefully.

DWF-800WP(¿ )-Deme 01.3.26 10:0 PM ˘`1

• GROUND WIRE
In case of 3-wire

power cord, ground

wire will not be

provided

• POWER CORD

• DRAIN HOSE

• LINT FILTER

• COLD WATER TAP

After using the washer,

close the water tap

• DETERGENT CASE

• ADJUSTABLE LEG

• SOFTENER INLET

• BLEACH INLET

• CONTROL PANEL

• POWER SWITCH

• PULSATOR

PARTS AND FEATURES

ACCESSORIES (Pull Option)

DRYTEN COVER UNDER WATER TAP ADAPTER

In case of screw-shaped inlet hoses, water tap
adapters will not be provided.

INLET HOSE

HOSE DRAIN (FOR NON-PUMP) HOSE CONNECTORHOSE DRAIN (FOR PUMP) CONNECTOR INLET

UP

DRYTEN

The parts and features of your washer are illustrated on this page.
Become familiar with all parts and features before using your washer.

NOTE

•

The drawings in this book may vary from your washer model.
They are designed to show the different features of all models covered by this book,
Your model may not include all features.

• HOT WATER TAP
After using the washer, close the water tap.
In case of the single valve model,
there is no hot water valve.

DWF-800WP(¿ )-Deme 01.3.26 10:0 PM ˘`2

Read all instructions before using your washer

Save these instructions

Your safety is important to us.
To reduce the risk of fire, electrical shock, or injury when using your washer adhere to
the following basic precautions.

Understanding your responsibilities

• Flammable fluids (dry-cleaning solvents,

kerosene, gasoline, etc.) should not be
used or stored in or near your washer.
Do not add flammable fluids to your wash
water. These substances give off vapours
that can create a fire hazard or explosion.

• Have only a qualified person install, repair,
or replace parts on washer.

• Maintain washer properly.

• Protect washer from the weather and keep

it where the temperature will not fall below
freezing.

• Do not install the washer at a place of
extremely high humidity. It could cause an
electric shock or a short circuit.

• Ground washer properly.

• Connect washer to the correct outlet, electrical

supply, water supply, and drain supply.

• Do not wash fiberglass materials.
Small particles can stick to fabrics washed in following loads and cause skin irritation.

• After starting a cycle, do not reach into the
spin basket until all motion stops.

• Do not tamper with the controls.

• The appliance is not intended for use by

young children or infirm persons without
supervision.

• Do not use chlorine bleach and ammonia or acid (such as vinegar or rust remover) in the
same wash. Hazardous fumes can form.

•

Young children should be supervised to ensure
that they do not play with the appliance.

• If the supply cord is damaged, it must be
replaced by the manufacturer or its sevice
agent or a similarly qualified person in order
to avoid a hazard.

• Do not use hot water if standard temperature is over 50˚C (122˚F).
It could cause a deformation of plastic parts.

• Do not spray water on the control panel and back cover of the washer.
It could cause fire or an electric shock.

• In case of the dual valve model, if you connect only cold water inlet valve, while water temperature
is selected as hot or warm, there can be water leakage from unconnected water inlet valve.

• Unplug power supply cord before attempting to service your washer.

•

If the appliance is supplied from a cord extension
set or electrical portable outlet device it should be
positioned so it is not subjected to splashing or
ingress of moisture.

Please …

WASHER SAFETY

DWF-800WP(¿ )-Deme 01.3.26 10:0 PM ˘`3

Non-Pump Model Pump Model

Location of washer

Check location where washer will be installed. Make sure you have everything
necessary for correct installation.
Proper installation is your responsibility.

•Do not place or store your washer below 0°C (32°F) to avoid any damage from freezing.

•Install the washer on the horizontal solid floor.

Drain system

Never forget to install drain hose before operating your washer.
The packing box is opened, there are a drain hose.

INSTALLATION INSTRUCTIONS

• Connect the drain hose to the drain outlet at the back side of the washer.

Drain hose

Drain Outlet

Drain hose

If the washer is installed on an unsuitable floor, it could
make considerable noise, vibrate and cause a malfunction.
If washer is not level, adjust the front leg(A) up or down for
horizontal setting.

•Earthed electrical outlet(B) is required with 20cm of
bottom back of washer cabinet.

•Hot and cold water faucets (C) must be within 1m of the
upper back of the washer cabinet and provide water
pressure 0.3kgf/cm

2

-8kgf/cm2 (2.94N/cm2-78.4N/cm2).

C

UP DOWN

B

A

NOTES

• The opening must not be obstructed by carpeting when the washing machine is
installed on a carpeted floor.

DWF-800WP(¿ )-Deme 01.3.26 10:0 PM ˘`4

Recommended earthing method

WARNING

Laundry tub drain system Standpipe drain system

Pump Model

Non-Pump Model

1In case that it goes over

a door sill.
Don’t let the height of
the drain hose exceed
20cm from the bottom
of washer.

2In case of extending the

drain hose.
Don’t let the total length
exceed 3m.

3Be careful that the end

of the drain hose is not
immersed in water.

• Top of tub must be at least 86cm
(34inches) high and no higher than 130cm
from bottom of washer (A)

• Needs a 3cm minimum diameter
standpipe with minimum carry away
capacity of 30liters per minute.

• Top of tub must be at least 86cm
(34inches) high and no higher than 130cm
from bottom of washer (B)

ELECTRICAL REQUIREMENTS

For your personal safety, this washer must be earthed.
This washer is equipped with a power supply cord (A) having a
earthing plug (B). To minimize possible shock hazard, the cord must
be plugged into a mating earthing-type wall receptacle (C).
If a mating wall receptacle is not available, it is the personal
responsibility and obligation of the customer to have the proper
earthed wall receptacle installed by a qualified electrician.

• Electrical earth is required on this washer

• If it does not fit the outlet, have a proper outlet

installed by a qualified electrician.

• Don’t earth to a gas pipe

• Don’t change the power supply cord plug.

• Check with a qualified electrician if you are not

sure the washer is properly earthed.

electrical shock hazard:failure to follow these instructions could result in

death or serious injury.

C

B
A

3m

A

B

DWF-800WP(¿ )-Deme 01.3.26 10:0 PM ˘ `5

Be careful not to confuse hot water inlet and cold water inlet.
In using only one water tap or in case of attached one water inlet valve, connect the
inlet hose to the cold water inlet valve.

For Screw-Shaped Tap

For Ordinary Tap

INLET HOSE CONNECTION

1Pull down the collar of

the inlet hose to separate
it from the water tap
adapter.

2Loosen the four screws

properly in fitting into
water tap.

3

123

Fit the water tap adapter
into the water tap
and tighten the four
screws evenly while
pushing up the adapter
so that the rubber
packing can stick to the
water tap tightly.

4Remove the tape, and

screw connector B into
connect A tightly.

5Connect the inlet hose to

the water tap adapter by
pulling down the collar of
the hose end.

6Connect the inlet hose

adapter of the hose to
the water inlet of the
washer by turning it
clockwise to be fixed
tightly.

• Please check the rubber

packing inside the inlet hose
adapter of the hose.

Connect the inlet hose to
the water tap by
screwing the connector
tightly.

Connect the connector­inlet supplied if
necessary.

Insert the inlet hose
adapter into the water
inlet of washer and turn
it to be fixed.

*Check the packing in the inlet

Connector B

Connector A

Connector

Connector

Rubber
Packing

Hose

Connector

Connector

Rubber
Packing

Hose

Connector

inlet

DWF-800WP(¿ )-Deme 01.3.26 10:0 PM ˘ `6

Daewoo DWF-800WP Manuals come in various types, each serving a specific purpose to help users effectively operate and maintain their devices. Here are the common types of Daewoo DWF-800WP User Guides and the information they typically include:

• User Manuals: Provide comprehensive instructions on how to use the device, including setup, features, and operation. They often include troubleshooting tips, safety information, and maintenance guidelines.
• Service Instructions: Designed for technicians and repair professionals, these manuals offer detailed information on diagnosing and repairing issues with the device. They include schematics, parts lists, and step-by-step repair procedures.
• Installation Guides: Focus on the installation process of the device, providing detailed instructions and diagrams for proper setup. They are essential for ensuring the device is installed correctly and safely.
• Maintenance Manuals: Provide guidance on routine maintenance tasks to keep the device in optimal condition. They cover cleaning procedures, part replacements, and regular servicing tips.
• Quick Start Guides: Offer a concise overview of the essential steps needed to get the device up and running quickly. They are ideal for users who need immediate assistance with basic setup and operation.

Each type of Daewoo DWF-800WP instruction is designed to address specific needs, ensuring users have the necessary information to use, maintain, and repair their devices effectively.

2

ACP-5030RDS

16

1358

272

3

FR-063R

Instruction manual Daewoo FR-063R User Manual (Instruction manual), @3881GZ

4

1170

258

4

Daema DW-915XLE

Operation & user’s manual Daewoo Washer Operation & user’s manual (File: daewoo-daema-dw-915xle-operation-user-s-manual-4, Mon 10.2024)

4

209

42

5

ERF-40.M

Manual  ERF-40.M (Freezer ePDF User Manual, #PQ7EB1)

52

606

122

6

SG-9210P

Instruction manual Daewoo DVD VCR Combo Instruction manual (File: daewoo-sg-9210p-instruction-manual-64, 21.03.2025)

64

384

73

8

MC-5920SC

Service manual #Q7254H: MC-5920SC Stereo System Service manual

34

1360

245

9

DHC-X100N

Service manual User Manual: Daewoo DHC-X100N (6TTTO1, Upd.22/03/2025)

43

1038

229