Робот пылесос samsung sr10m7030ww инструкция

В настоящий момент товары недоступны для заказа на samsung.com/ru

В настоящий момент товары недоступны для заказа на samsung.com/ru

Выберите свое местоположение и язык.

• Добавить инструкцию
• Заказать инструкцию
• Политика конфиденциальности

Содержание:

• Комплектация
• Внешний вид
• Технические характеристики
• Функциональные возможности
• Инструкция по эксплуатации
• Преимущества и недостатки

Картинка с сайта: robotobzor.ru

Вид сверху

Картинка с сайта: robotobzor.ru

Вид сбоку

Картинка с сайта: robotobzor.ru

Вид снизу

Картинка с сайта: robotobzor.ru

Построение карты помещения

Картинка с сайта: robotobzor.ru

Работа датчиков

Картинка с сайта: robotobzor.ru

Управление роботом с телефона

Картинка с сайта: manualmachine.com

POWERbot

User manual

SR10M70

• Before operating this unit, please read the instructions carefully.

• For indoor use only.



, SR20M70



Series

Картинка с сайта: manualmachine.com

Contents

Safety information

03

Installation

08

Accessories / Installation note

Charging

10

Automatic charging / Recharging / Low
battery (Lo)

Using POWERbot

12

Turning the power on/off / Selecting
cleaning modes/ Using special cleaning
functions

Using the remote control

16

Name of each part

19

Top / Bottom / Display panel

Setting time/schedule

21

Setting the time / Setting the schedule

Cleaning and maintaining

24

Cleaning the dustbin / Cleaning the sensors and
the camera / Cleaning the brush and Auto shutter
tool / Cleaning the Driving wheel

26

30

32

34

36

37

ENGLISH-02

Samsung Smart Home App

Preparing the network / Using the Samsung
Smart Home app

Notes and cautions

Charging / Using / Cleaning and maintenance /
About the battery / About the IrDA sensor

Information codes

Troubleshooting

Open Source Announcement

Specications

Картинка с сайта: manualmachine.com

Safety information

SAFETY INFORMATION

• Before operating the appliance, please read this manual thoroughly and

WARNING

WARNING

CAUTION/WARNING SYMBOLS USED

retain it for your reference.

• Because these following operating instructions cover various models, the

characteristics of your vacuum cleaner may differ slightly from those
described in this manual.

WARNING

CAUTION

OTHER SYMBOLS USED

NOTE

Indicates that a danger of death or serious injury exists.

Indicates that a risk of personal injury or material damage exists.

Indicates that a risk of personal injury or material damage exists.

This Smart Robot vacuum supports from Samsung Smart Home.
More detailed information, please visit Samsung.com/Smarthome.

ENGLISH-03

Картинка с сайта: manualmachine.com

Safety information

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precautions should be observed, including
the following:

READ ALL INSTRUCTIONS BEFORE USING YOUR POWERbot.

Unplug from outlet when not in use and before conducting maintenance.

WARNING: to reduce the risk of re, electric shock, or injury:

GENERAL

• Use only as described in this manual.

• Do not operate POWERbot or the battery charger / docking station if it has
been damaged in any way.

• If the vacuum cleaner is not working as it should, has been dropped, damaged,
left outdoors, or dropped in water, return it to a customer care center.

• Do not handle the battery charger / docking station or POWERbot with wet
hands.

• Use only on dry, indoor surfaces.

• This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety. Cleaning and user
maintenance shall not be made by children without supervision.

Battery charger / Docking station

• Do not modify the polarized plug to t a non-polarized outlet or extension
cord.

• Do not use outdoors or on wet surfaces.

• Unplug the battery charger / docking station from the outlet when not in use
and before servicing.

• Use only the battery charger / docking station supplied by the manufacturer to
recharge.

• Do not use with a damaged cord or plug or a loose power outlet.

• Do not pull or carry by the cord, use the cord as a handle, close the door on the
cord, or pull the cord around sharp edges or corners. Keep the cord away from
heated surfaces.

• Do not use extension cords or outlets with inadequate current carrying
capacity.

• Do not unplug by pulling on the cord. To unplug, grasp the plug, not the cord.

ENGLISH-04

Картинка с сайта: manualmachine.com

• Do not mutilate or incinerate batteries as they will explode at high
temperatures.

• Do not attempt to open the battery charger / docking station. Repairs should
only be carried out by a qualied customer care center.

• Do not expose the battery charger / docking station to high temperatures or
allow moisture or humidity of any kind to come into contact with the battery
charger / docking station.

POWERbot

• Do not pick up hard or sharp objects such as glass, nails, screws, coins, and etc.

• Do not use without a lter in place. When servicing the unit, never put ngers
or other objects into the fan chamber in case the unit accidentally turns on.

• Do not put any objects into openings. Do not use with any openings blocked;
keep openings free of dust, lint, hair, and anything that may reduce air ow.

• Do not pick up toxic materials (chlorine bleach, ammonia, drain cleaner, etc.).

• Do not pick up anything that is burning or smoke, such as cigarettes, matches,
or hot ashes.

• Do not use to pick up ammable or combustible liquids such as gasoline, nor
use on areas where they may be present.

• Locations with candles or desk lamps on the oor.

• Locations with unattended res (re or embers).

• Locations with distilled alcohol, thinner, ashtrays with burning cigarettes, etc.

• Do not use POWERbot in an enclosed space lled with vapours given off by oil
based paint, paint thinner, moth proong substances, ammable dust, or other
explosive or toxic vapours.

• Leaks from battery cells can occur under extreme usage or temperature
conditions. If the liquid gets on skin, wash quickly with water. If the liquid gets
into the eyes, ush them immediately with clean water for a minimum of 10
minutes. Seek medical attention.

ENGLISH-05

Картинка с сайта: manualmachine.com

Safety information

WARNING

f Please prevent any risk of electric shock

or re.

– Do not damage the power cord.
– Do not pull the power cord too hard or

touch the power plug with wet hands.

– Do not use a power source other than 100-

240V~ and also do not use a multi outlet
to supply power to number of devices
at the same time. (Do not leave the cord
carelessly on the oor.)

– Do not use a damaged power plug, power

cord or loose power outlet.

f Clean dust or any foreign matters on the

pin and contact part of the power plug.

– There is a risk of electric shock or

malfunction.

WARNING

f Do not use POWERbot near combustible

materials.

– Place near candle, desktop lamps, replace

or near combustible materials such as
gasoline, alcohol, thinners etc.

f The POWERbot is intended for household

use therefore do not use it in an attic,
basement, storage, industrial building,
out of indoor space, places with moisture
(such as bathroom, laundry), on the table
or shelves.

– The POWERbot can be damaged or

malfunction.

f Be sure POWERbot does not pass through

or touch any kind of liquids.

– The POWERbot can be severely damaged

and it may contaminate other areas if the
wheels pass through liquid.

f Attach the boundary markers on a place

where the POWERbot may fall such as
a stair or banister to prevent product
damage and injury.

– Please keep the cliff sensor clean all the

time for safety.

Power related

Before use

f Do not spill any liquids on the docking

station.

– There is a risk of re or electric shock.

f Do not use the docking station for

anything other than its intended purpose.

– There is a risk of re or severe damage to

the docking station.

f Always keep the cliff sensor clean for

your safety.

WARNING

f If any abnormal sounds, smells or smoke

come from POWERbot, immediately shut
off the emergency switch at the bottom
of POWERbot and contact a service
center.

WARNING

In use

Cleaning and
maintenance

f When power cord is damaged, contact

a service center to get it replaced by a
certied repairman.

– There is a risk of re or electric shock.

f Please check with a Samsung Electronics

service center when exchanging
batteries.

– Using batteries from other products can

cause malfunction.

CAUTION

f Insert the dustbin before using

POWERbot.

f Be careful with the followings for proper

automatic recharging.

– Always turn on the power of the docking

station.

– Install the docking station where

POWERbot can easily nd.

– Do not leave any object in front of the

docking station.

Before use

ENGLISH-06

Картинка с сайта: manualmachine.com

f When installing the docking station, do

not leave the cord carelessly on the oor
since POWERbot may get tangled by it.

f Do not use POWERbot on black colored

oors.

– The POWERbot may not be able to operate

normally.

f Do not place any objects within 0.5m

to both sides and 1m to the front of the
docking station.

f Make sure the docking station’s charging

contact is not damaged or have any
foreign matters on it.

f Do not install the docking station in an

area with a dark oor.

– If the oor around the docking station is

dark, recharging is hindered.

f Move any obstacles that may disturb

POWERbot’s movement (such as
children’s indoor swing or slides) before
cleaning.

f Do not use the POWERbot in a place

which is narrower than the turning
radius (0.5 m or less) of the POWERbot.

f To clean all areas of your house, open all

rooms and attach the boundary markers
on the places where the POWERbot
may get damaged such as a front door,
veranda, bathroom, and stairs for safety.

f For the very low areas where the

POWERbot may get stuck, attach the
boundary markers to prevent the
POWERbot from getting in.

CAUTION

f Using POWERbot on thick carpet may

damage both POWERbot and the carpet.

– The POWERbot cannot pass over carpet

that is thicker than 1 cm.

f Do not use POWERbot on tables or other

high surfaces.

– There is a risk of damage if it falls.

In use

f The POWERbot may bump into chair,

desk legs therefore move them away for
faster and efcient cleaning.

f When POWERbot is operating, do not lift

it up or carry it to another area.

f Do not hold by driving wheels of

POWERbot when carrying it to another
area.

f Do not put any objects on top of

POWERbot and camera since it may
cause malfunction.

f Remove any large papers or plastic bags

immediately when using POWERbot since
they may block the intake.

f Do not aim the red pointer directly at

people or animals.

f Do not lie down around the POWERBOT

that is running.

– Your hair may be caught in the brush,

resulting in physical injury.

CAUTION

Cleaning and
maintenance

f Prevent any damage to POWERbot by

complying with the following

– Do not clean POWERbot by spraying water

directly onto it or use benzene, thinner,
acetone or alcohol to clean it.

f Do not disassemble or repair POWERbot.

This should only be done by a certied
repairman.

f Always keep the obstacle sensor, cliff

sensor and camera clean.

– If foreign matter accumulates, sensors may

malfunction.

ENGLISH-07

Картинка с сайта: manualmachine.com

Installation

The docking station must be plugged in and turned on at all times.

Install the docking station in
a place without obstacles and
danger of falling.

About 1m

About

0.5m

About

0.5m

DC-IN

Connect the

battery charger

1

jack to the
docking station

Connect the

power cord

2

to the battery
charger

When using the battery
charger, the side with the
sticker attached must face
down.

ENGLISH-08

Connect the

power plug to

3

the outlet

Картинка с сайта: manualmachine.com

Accessories

or

Remote control

(Not included with

SR10M701 Series )

Docking station Power cord Battery charger

 Refer to page 15 for the installation of boundary markers.

Batteries (AAA type) User manual Spare lter

(Option)

Boundary markers

(Option)

Installation note

Note

f Install the docking station in a place where the oor and wall are level.
f It is best to install the docking station along the grain of wooden oors.
f If the emergency switch is off, the POWERbot will not charge even if it is docked on the

docking station.

f Always turn on the power of the docking station.

– If power is not supplied to the docking station, the POWERbot cannot nd it and cannot

automatically recharge.

– If the POWERbot is left detached from the docking station, the battery will drain naturally.

f If the POWERbot is in sleep mode, power will not come on even if the emergency switch

is turned off and then on. Press and hold the [Start/Stop] button on the POWERbot to turn
the sleep mode off.

ENGLISH-09

Картинка с сайта: manualmachine.com

Charging

After completely charging the POWERbot for the rst time (after purchase), it can be used for 60
min. in Nomal ( ) mode. (Refer to the page 39 for the charging time.)

Smart Charging

If POWERbot runs out of charge in Auto clean mode, it will automatically return to the docking
station to be charged and will recommence the cleaning to complete the cleaning area after two­third of battery charging is done. (Max. 2 times).

• Rated input voltage of

WARNING

this product is 100­240V~.

Turn on the

emergency switch

1

on the bottom

You must turn on the
emergency switch to turn on
the POWERbot.

Press and release the

button.

Manually charge
the POWERbot by

2

placing it on the
docking station

Make sure the charging
pins on the POWERbot
and the docking station
are aligned.

ENGLISH-10

<SR10M701 Series>

<SR10M702 / SR10M703 /

SR20M70 Series>

Check the

charging status

3

For SR1M701 Series,
The battery indicator blinks at 1 sec.
intervals during charging and the indicator
will remain in ON status when fully charged.

SR1M702 / SR1M703 /

For

SR2M70 Series

« » will turn on according to charging
progress and «FULL» will turn on when
charging is complete.

,

Картинка с сайта: manualmachine.com

Automatic charging

1. SR10M701 Series

If the battery indicator blinks at 0.4 sec. intervals,
the POWERbot will automatically return to the
docking station to be charged.

2. SR10M70 / SR2070 Series

When the battery indicator blinks during cleaning,
the POWERbot will return to the docking station to
charge itself automatically.

Recharging

You can command the POWERbot to
recharge at the docking station while it is
in cleaning.

Low battery (Lo)

Manually charge the POWERbot by placing
it on the docking station.

Steps to take if recharging not occuring:

Check the installation status of the
docking station when:

fthe docking station is located in a place where
the POWERbot cannot easily access it.

fthe distance between the docking station and
POWERbot is over 5m.

– It may take a long time for POWERbot to

return to the docking station for recharging

Manually charge the POWERbot when:

fthe docking station is located in a corner
fthe battery is fully exhausted
fthe POWERbot is immobilized by an obstacle

(furniture etc.)
fthe POWERbot can’t climb a threshold near

the docking station (The maximum height of
a threshold the POWERbot can climb is about

1.5 cm.)
fwhen the battery indicator blinks and «Lo» is

displayed
fwhen the battery indicator blinks (Applicable

to SR10M701 Series)
fwhen the POWERbot is set to the Spot clean or

Manual clean mode

ENGLISH-11

Картинка с сайта: manualmachine.com

Using POWERbot

You must turn on the emergency switch on the bottom of the unit before using POWERbot.

Turning the power on/off

Press the button for more than 3seconds

• When POWERbot is not used for 30 min.;

WARNING

SR10M70U / SR20M70U series: Turns to energy-saving mode.
SR10M70W / SR20M70W series: Automatically returns to the docking

station to be charged.

Starting Auto clean mode

Press and release this button. The POWERbot
moves and automatically cleans the set areas only
once.

 Stop cleaning: Press and release the button

Using Spot clean mode

The POWERbot cleans a localized area intensely.

Recharging

You can command POWERbot to recharge at the
docking station automatically while it is cleaning
by pressing this button.

ENGLISH-12