Ректозорин свечи инструкция по применению

Fender MUMPPR6171 Mustang Micro Plus Guitar Amplifiers

Product Information

Specifications

• Model: FCCISED
• Frequency: FCC/IC
• SAR: 1.6 W/kgSAR

Product Usage Instructions:

Safety Precautions:
Before using the product, carefully read and understand all safety precautions
mentioned in the user manual.

Power On/Off:
To power on the equipment, press and hold the power button for a few seconds.
To power off, repeat the same process.

Settings Adjustment:
Use the control panel to adjust settings such as frequency, volume, and other
preferences as needed.

Maintenance
Regularly clean the equipment using a soft cloth and avoid using harsh
chemicals that may damage the device.

FAQ:
Q: What should I do if the equipment malfunctions?
A: In case of equipment malfunction, refer to the troubleshooting section of
the user manual or contact customer support for assistance.

INTRODUCTION

This manual is a guide to the features and functions of Mustang Micro Plus—a
plug-and-play headphone amplifier and interface that connects directly to your
guitar and bass to deliver amp models, effects models, Bluetooth stream-ing
and more. With fantastic Fender Mustang amplifier sound and yet no larger than
a deck of cards, Mustang Micro Plus is easily portable and provides up to six
hours of battery-operated playing time.
Mustang Micro Plus is simple and intuitive. Connect it to any popular
instrument model using the 1/4” rotating input plug. With 25 great-sounding
Mustang amplifier models, 25 effect models in moveable blocks and remote
editing using the Fender TONE™ app, players can choose among 100 onboard
presets (70 factory presets and 30 empty pre-sets ready for personalized
customization) and access cloud presets. Turn Bluetooth on and stream music to
play along with, or play to online sources with synced audio and video. The
display window conveniently shows the preset in use, onboard tuner and other
functions, and the USB-C port enables easy audio recording and firmware
updates. With remarkably compact sound, style and versatility, Mustang Micro
Plus delivers it all straight to your earbuds, headphones or digital recording
software.

FEATURES

• A. DISPLAY WINDOW: Black display window with white text shows preset name and number in use. Also displays EQ, MODIFY, SAVE and TUNER functions. To conserve battery life, the display will time out 10 seconds after the last button press; press any button to wake the display.

• B. MASTER VOLUME: Adjusts overall volume level of instrument signal and Bluetooth audio.

• C. ROTATING INPUT PLUG: Standard mono 1/4” plug rotates up to 270 degrees for easy compatibility with all popular instrument models.

• D. TAP TEMPO/TUNER BUTTON: Tap button twice or more to set tempos for delay effects; press and hold for two seconds to activate onboard tuner.

• E. MODIFY BUTTONS: Buttons (-/+) adjust a single parameter of assigned modulation, reverb or delay
  effect; display indicates parameter control.

• F. EQ BUTTONS: Buttons (-/+) adjust overall instrument signal tone. Select among nine EQ presets including flat
  (post amp/effect); display indicates EQ preset in use.

• G. PRESET BUTTONS: Buttons (-/+) select preset from 100 options; display indicates preset in use.

• H. SAVE: Press to initiate preset save prompt on the display.

• I. POWER/BLUETOOTH SWITCH/LED: Three-position slider switch turns Mustang Micro Plus on and off and activates Bluetooth audio pairing. LED indicates power/Bluetooth/charging status.

• J. USB-C PORT: For charging, recording output and firmware updates.

• K. HEADPHONE OUTPUT: 1/8” stereo headphone jack.

INSTRUMENT CONNECTION AND POWERING UP

Connecting Mustang Micro Plus to your guitar couldn’t be easier—simply rotate
the 1/4” input plug out from the unit and plug it into the guitar’s input
jack.
Slide the power switch to the center ON position; the power LED will
illuminate green for 10 seconds and then extinguish, indicating that Mustang
Micro Plus is on and charged (differ-ent LED colors indicate different
charging status; see page 8). You’re now ready to choose or create a preset
with an amp model and a selection of effects, adjust volume and EQ, tune up,
engage Bluetooth, and start playing.
If power is on but no instrument input is detected for 15 minutes, Mustang
Micro Plus will automatically switch to a low-power sleep mode; press any
button to wake it up. Slide the power switch to OFF to power down.

• WARNING: Connecting Mustang Micro Plus to your instrument, disconnecting it or touching the end of the device’s plug may cause a loud noise.
• To avoid hearing damage when wearing heaphones/earbuds, follow these steps to ensure safe operation of your device: • When connecting/disconnecting Mustang Micro Plus, remove headphones/earbuds, ensure that the device is turned off, or ensure that the device’s MASTER VOLUME control is set to zero.
• Turn the device on with MASTER VOLUME set to zero, then gradually adjust volume to reach a comfortable listening level.
• When wearing headphones/earbuds, connecting/disconnecting Mustang Micro Plus or touching its exposed plug while unit is on and MASTER VOLUME is up is similar to plugging an instrument cable into a live amplifier with volume up or to touching the exposed end of a live instrument cable.

BLOCKS

All Mustang Micro Plus presets contain five “blocks” for creating an entire
signal path from input to output—one amplifier block and four effects blocks.
There are 25 amplifier models, each paired with a default cabinet model, and
25 onboard effect models organized into four categories: stompbox (11),
modulation (6), delay (4) and reverb (4).
The amp block contains an amplifier model paired with a fixed speaker cabinet
model. Basic amp settings can be adjusted, while more advanced settings such
as noise gate, gate position, sag, tube bias, etc. are fixed. The amp block is
stationary, with its default position at the center of the signal path.
Each preset has four effect blocks, one for each effect category—stompbox,
modulation, delay and reverb. Effect blocks are moveable and can be placed
before or after the amp block using the Fender TONE app.

AMPLIFIER AND CABINET MODELS

AMPLIFIER MODEL| CABINET MODEL| | AMPLIFIER MODEL| CABINET
MODEL
—|—|—|—|—
’57 Champ| ’57 Champ| BB15 Low Gain| 1×12 BB15
’57 Deluxe| ’57 DLTX| BB15 Mid Gain| 4×12 SOL
’57 Twin| ’65 Twin| BB15 High Gain| 4×12 SOL
’59 Bassman| ’59 Bassman| Super-Sonic| 1×12 SS
’65 Princeton| ’65 Princeton| FBE-100| 4x12B V30
’65 Deluxe| ’65 DLTX| Metal 2000| 4×12 GB
’65 Twin| ’65 Twin| Uber| 4×12 RCT
’60s British| 2×12 Blue| ’60s Thrift| ’57 DLX
British Watts| 4×12 V30| Excelsior| Excelsior
’70s British| 4×12 GB| Studio Preamp| (None)
’80s British| 4×12 75W| Tube Preamp| (None)
’90s American| 4×12 GB| Acoustic Sim| (None)
British Colour| 4×12 75W|

EFFECTS MODELS

Delay
3| Mythic Drive| 14| Phaser| 20| 2290 Delay
4| Blackbox| 15| Vibratone| 21| Reverse Delay
5| Fuzz| 16| Sine Tremolo|
6| Big Fuzz| 17| Harmonic Tremolo| | REVERB
7| Octobot| | 22| Large Hall
8| Compressor| 23| Small Room
9| Sustain| 24| Spring Reverb
10| 5-Band EQ| 25| Mod. Large Hall
11| Envelope Filter**|

BUTTON AND DISPLAY ACTIONS

POWER/BLUETOOTH SWITCH/LED
Power Mustang Micro Plus on and off as noted on page 3. The POWER switch is
also used to initiate Bluetooth use; see the BLUETOOTH section on page 8 for
details. The POWER LED also indicates different charging status conditions;
see the CHARGING section on page 8 for details. On power-down, Mustang Micro
Plus keeps the last used/saved preset and EQ settings and returns to them on
the next power-up.

TAP TEMPO
Press the TAP BUTTON twice or more to set a tempo (in BPM) for a delay effect.
The BPM designation and a flashing circle will appear in the DISPLAY WINDOW
during adjustment. The TAP BUTTON displays the current tempo on the first
button press, which counts towards the two-tap minimum to change the tempo:

TUNER
Press and hold the TAP BUTTON for two seconds to activate the TUNER; the
target note and indicator needle will appear in the DISPLAY WINDOW. The
indicator needle shows degrees of sharpness and flatness until the correct
pitch is attained, indicated by illumination of the target pitch in a white
box. Instrument and Bluetooth audio signals are muted while the TUNER is
engaged. Press any button to exit the TUNER:

EQ

To fine-tune instrument tone, tap the EQ BUTTONS to select one of nine
different preset EQ profiles* (post amp/effect). The EQ preset name and number
will appear in the DISPLAY WINDOW:

• FLAT, GUITAR FOCUS 1, GUITAR FOCUS 2, BRIGHT CUT, BRIGHT BOOST 1, BRIGHT BOOST 2, LOW CUT 1, LOW CUT 2, BASS BOOST

MODIFY
Tap the MODIFY BUTTONS to adjust a single parameter of an assigned modulation,
reverb or delay effect (i.e., delay level, reverb level, modulation rate, et.
al). The block category, parameter name and parameter value will appear in the
DISPLAY WINDOW. Note that the minimum and maximum control limits of the MODIFY
buttons will vary according to the effect parameter assiged, and will default
to the saved preset value.

The MODIFY parameter is assignable per preset using the Fender TONE app. In
the app, navigate to the preferred effect and single-touch any parameter to
get an onscreen gradient that can be used for more precise adjustments. Touch
and hold any parameter for two seconds to initiate MODIFY control assignment
and follow the onscreen prompts. The assigned MODIFY parameter will be
indicated by a white ring around the parameter control:

PRESET
Mustang Micro Plus has 70 factory presets and 30 empty slots for user-created
presets. Pressing the PRESET BUTTONS will wake the display screen and show the
current preset name and number. Subsequently, a single press to either button
will move up or down to the next preset; pressing and holding either button
will scroll up or down with acceleration.

SAVE
When a preset has been edited from the saved state, the preset number
inverts from white text on black to black text in a white box. Only changes
made to effect parameters and tap BPM are saved on Mustang Micro Plus; preset
name, location and other preset parameters are editable using the Fender TONE
app.
To save a preset edit, press and hold the SAVE BUTTON for two seconds to
initiate the save prompt. Display will wake and display SAVE PRESET?

Press the SAVE BUTTON to confirm and save. “PRESET SAVED” will appear in the
DISPLAY WINDOW for two seconds; the saved preset name and number will then
appear. The display will subsequently time out if no other buttons are
pressed:

Press any other button to exit without saving. The unsaved preset name and
number will appear in the DISPLAY WINDOW. The display will subsequently time
out if no other buttons are pressed.

In the unsaved preset at right, the preset number in the DISPLAY WINDOW
appears as black text in a white box.

BLUETOOTH

Mustang Micro Plus easily streams Bluetooth audio, so you can play along in
your headphones or earbuds. The device is discoverable as “Mustang Micro Plus”
on smartphones and other Bluetooth devices.
To activate Bluetooth pairing mode, push the POWER switch to the far left and
hold it there for two seconds. The POWER switch Bluetooth position is spring-
loaded for momentary contact only, and will return to the center “ON” position
when released. In pairing mode, the POWER LED will flash blue for two minutes
or until a connection is established.

On successful connection, the POWER LED will turn solid blue for 10 seconds
and then extinguish.
To disconnect a Bluetooth device from Mustang Micro Plus, hold the POWER
switch in the Bluetooth position for two seconds and then release it (as when
pairing). This will end the Bluetooth connection and return Mustang Micro Plus
to pairing mode with a flashing blue LED; pairing mode will expire within two
minutes if no other Bluetooth connec-tion is made, and the blue LED will
extinguish. Alternately, disconnect using the external device.
Mustang Micro Plus automatically pairs with the last connected Bluetooth
device if that device is available. Note that MASTER VOLUME controls
instrument and overall volume only; the mix between an instrument and a
Bluetooth audio source is determined using the volume control on the external
device.

CHARGING
Mustang Micro Plus provides up to six hours of battery-powered operation.
Recharge Mustang Micro Plus using the USB-C jack (H) on the bottom of the unit
and the included USB cable. POWER LED color indicates charging status:

on or off.
Green (solid)| Power is on, USB is connected and battery is fully
charged.
Green (flashing)| Battery is at greater than 50 percent and USB is not
connected. LED flashes green for one second every five seconds.
Yellow (flashing)| Battery is at 20 percent-50 percent and USB is not
connected. LED flashes yellow for one second every five seconds.
Red (flashing)| Battery is at less than 20 percent and USB is not
connected. LED flashes red for one second every five seconds.

Red (flashing rapidly)

| LED flashing red rapidly while unit is on and USB is plugged in indicates a
battery charge error possibly due to extremes of temperature. Unplug USB, turn
unit off, allow unit to reach room temperature, restart unit.

RECORDING
Mustang Micro Plus can be used as an input device for digital recording
software by using a USB cable to connect the USB-C jack on the bottom of the
unit to the USB port on a Mac or PC.
Note that Mustang Micro Plus can only be used as a source for USB audio (which
cannot be routed back to Mustang Micro Plus for monitoring).
No external driver is needed to connect to an Apple computer. For assistance
with configuring and using USB recording, visit the “Connected Amps” section
at https://support.fender.com

FIRMWARE UPDATE

Firmware updates for Mustang Micro Plus require use of the Fender Mustang
Micro Updater application; download-able at www.fender.com/mmfirmware. The
installer will guide the update process using three steps:

1. With Mustang Micro Plus off, connect a USB cable to the USB-C jack and connect the other end to a Mac or PC.
2. Press and hold the ____ button.
3. Turn Mustang Micro Plus on while continuing to hold the _____ button for three seconds.

Successful firmware update initiation is then indicated by a solid white POWER
LED for 10 seconds; the white LED will then begin flashing to indicate an
update in process.
When complete, the POWER LED will illuminate solid green to indicate a
successful firmware update or solid red to indicate a failed update. Mustang
Micro Plus is automatically powered up during the firmware update process;
when an update is completed successfully, disconnect the USB cable from
Mustang Micro Plus and restart the unit.

FACTORY RESET
A factory reset returns Mustang Micro Plus buttons to its original factory
settings and clears the Bluetooth paired device list. Initiate factory reset
by turning Mustang Micro Plus on while simultaneously holding the and
buttons for three seconds. Successful completion of a factory reset is
indicated by .

SPECIFICATIONS

• TYPE PR 6171
• INPUT 1/4” plug
• INPUT IMPEDANCE1MΩ
• OUTPUT 1/8” stereo
• OUTPUT POWER 30mW/channel
• HEADPHONE IMPEDANCE 16Ω or greater
• WORKING RANGE
• BATTERY TYPE Lithium-ion rechargeable
• USB CURRENT 600 mA (max)
• BATTERY LIFE 4 hours (high volume) Up to 6 hours (low volume)
• BLUETOOTH V5.1 with A2DP v1.3.1 protocol
• DIMENSIONS (INPUT PLUG Width: ” ( cm) Height: ” ( cm) Depth: ” (___ cm)
• IN STORED POSITION)
• WEIGHT _ oz. (g)Product specifications subject to change without notice.

PART NUMBERS

• A PRODUCT OF
• FENDER MUSICAL INSTRUMENTS CORP.
• 345 CESSNA CIRCLE
• CORONA, CALIF. 92878 U.S.A.
• AMPLIFICADOR DE AUDIO
• IMPORTADO POR: Fender Ventas de México, S. de R.L. de C.V.
• Calle Huerta #279, Int. A. Col. El Naranjo. C.P. 22785. Ensenada, Baja California, México. RFC: FVM-140508-CI0
• Servicio al Cliente: 01(800) 7887395, 01(800) 7887396, 01(800) 7889433
• Fender® and Mustang™ are trademarks of FMIC.
• Other trademarks are property of their respective owners.
• Copyright © 2024 FMIC. All rights reserved.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>