Pioneer fh s720bt инструкция

Картинка с сайта: manualspro.net

Pioneer FH-S720BT CD RDS Receiver

Картинка с сайта: manualspro.net

Product Information

Specifications:

• Model: FH-S720BT
• Input Jack: AUX input jack (3.5 mm stereo jack)
• USB Port: Yes
• Display: Display window

Product Usage Instructions

Getting Started

To turn on the power, press SRC/OFF. To turn off the power, press and hold
SRC/OFF.

Basic Operation

Adjust the volume by turning the M.C. dial. Select a source by pressing
SRC/OFF repeatedly. Change the display information by pressing DISP
repeatedly.

Frequently Used Operations

FAQs

• Q: How do I reset the microprocessor?
  • A: Press the RESET button with a pen tip or other pointed instrument.
• Q: What should I do when the setup menu appears in the display?
  • A: Turn the M.C. dial to select the options, then press to confirm. To proceed to the next menu option, you need to confirm your selection.
• Q: What is the warning about speaker system modes?
  • A: Do not use the unit in standard mode when a speaker system for network mode is connected, and vice versa, as it may cause damage to the speakers.

“`

CD RDS RECEIVER AUTORADIO CD RDS SINTOLETTORE CD RDS RECEPTOR DE CD CON RDS CD
RDS-EMPFÄNGER CD RDS-ONTVANGER
FH-S720BT

Operation Manual Mode d’emploi
Manuale d’istruzioni Manual de instrucciones
Bedienungsanleitung Bedieningshandleiding

About this manual: · In the following instructions, a USB memory or USB audio
player are referred to as
“USB device”.
– 2 –

Getting Started

Basic operation

FH-S720BT

SRC (source)/OFF Disc loading slot

AUX input jack (3.5 mm stereo jack) USB port

Display window

(eject)

English

DISP (display)

BAND/

BASS

(navigation)/LIST

M.C. (multi-control) dial

Frequently used operations
Purpose Turn on the power*
Adjust the volume Select a source Change the display information Return to the
previous display/list

Operation
Press SRC/OFF to turn on the power. Press and hold SRC/OFF to turn off the
power.
Turn the M.C. dial.
Press SRC/OFF repeatedly.
Press DISP repeatedly.
Press BAND/ .

– 3 –

English

Purpose

Operation

Return to the normal display from the menu Press and hold BAND/ .

Change the display brightness

Press and hold BAND/ .

Answering a call

Press any button.

Ending a call

Press .

Boost the bass level

Press BASS. · You can select the bass level ([HI] or
[LOW]) in [D.BASS] (page 26).

• When this unit’s blue/white lead is connected to the vehicle’s auto-antenna relay control terminal, the vehicle’s antenna extends when this unit’s source is turned on. To retract the antenna, turn the source off.

Display indication

Indication BASS APP

Description Appears when a lower tier of the menu or folder exists.
Appears when a Bluetooth audio player is connected to this unit by A2DP
(Advanced Audio Distribution Profile) (page 11). Appears when a traffic
program is received.
Appears when the TA (traffic announcements) function is set (page 24).
Appears when the sound retriever function is set (page 27).
Appears when the BASS function is activated. Appears when random/shuffle play
is set (except when BT AUDIO is selected as the source). Appears when repeat
play is set (except when BT AUDIO is selected as the source). Appears when a
Bluetooth connection is made (page 11).
Appears when a Pioneer Smart Sync connection is made (page 17). Appears when
[CLOCK SET] is set to [12H] (page 27).
Appears when the list menu is displayed.
Appears when a Bluetooth telephone is connected to this unit. Indicates the
antenna level. Appears when a second Bluetooth telephone is connected to this
unit.

Appears when a Bluetooth telephone is connected to this unit. Indicates the
battery level.
Appears when a device is being connected to the unit for charging.

– 4 –

English

Indication

Description
Appears when a radio signal is received. Indicates the antenna level.

Resetting the microprocessor
The microprocessor must be reset in the following situations: ­ Before using
this unit for the first time after installation ­ If the unit fails to operate
properly ­ When strange or incorrect messages appear on the display
1 Press the RESET button with a pen tip or other pointed instrument.

RESET button
Setup menu
When you turn the ignition switch to ON after installation, the setup menu
appears in the display.
WARNING
Do not use the unit in standard mode when a speaker system for network mode is
connected to the unit. Do not use the unit in network mode when a speaker
system for standard mode is connected to the unit. This may cause damage to
the speakers.
1 Turn the M.C. dial to select the options, then press to confirm.
To proceed to the next menu option, you need to confirm your selection.

– 5 –

English

Menu Item LANGUAGE
ENG, , TUR, FRA, DEU
CLOCK SET
FM STEP [100], [50] SPEAKER MODE [STANDARD], [NETWORK]

Description Select the language to display the text information from a
compressed audio file.
Set the clock. 1 Turn the M.C. dial to adjust the hour, then press to confirm.
The indicator moves to the minute setting automatically. 2 Turn the M.C. dial
to adjust the minute, then press to confirm. Select the FM tuning step from
100 kHz or 50 kHz.
Switch between two operation modes: the 2-way network mode (NETWORK) and the
standard mode (STANDARD) according to the connections you have established.
For details on operation modes, see page 21. After selecting the appropriate
mode, turn the M.C. dial to select [YES], then press to confirm. · You cannot
complete the setup menu without setting the
[SPEAKER MODE]. · Once the speaker mode is set, this setting cannot be changed
unless the default settings of this product are restored. Restore the default
settings to change the speaker mode setting (refer to SYSTEM RESET on page 7).
· When [NETWORK] is selected, the beep tone function is not available.

2 [QUIT :YES] appears.
To return to the first item of the setup menu, turn the M.C. dial to select
[QUIT :NO], then press to confirm.
3 Press the M.C. dial to confirm the settings.

NOTE These settings other than [SPEAKER MODE] can be made at any time from the
SYSTEM settings (page 27) and INITIAL settings (page 7).

Canceling the demonstration display (DEMO OFF)
1 Press the M.C. dial to display the main menu. 2 Turn the M.C. dial to select
[SYSTEM], then press to confirm.

– 6 –

English

3 Turn the M.C. dial to select [DEMO OFF], then press to confirm. 4 Turn the
M.C. dial to select [YES], then press to confirm.

INITIAL

settings

1 Press and hold SRC/OFF until the unit turns off. 2 Press and hold SRC/OFF to
display the main menu. 3 Turn the M.C. dial to select [INITIAL], then press to
confirm. 4 Turn the M.C. dial to select an option, then press to confirm.

Menu Item

Description

FM STEP

Select the FM tuning step from 100 kHz or 50 kHz.

[100], [50]

REAR-SP [FUL]

Select when there is a full-range speaker connected to the rear speaker output
leads.

[SW]

Select when there is a subwoofer connected directly to the rear

speaker output leads without any auxiliary amplifier.

SYSTEM UPDATE

Select [SYSTEM INFO] to confirm the latest system information

[SYSTEM INFO], [S/ W UPDATE]

on the unit. Select [S/W UPDATE] to update the unit to the latest software and
initialize the unit settings. For details on the latest software

and updating, visit our website.

SYSTEM RESET [YES], [NO]

Select [YES] to initialize the unit settings. The unit will be restarted
automatically.

Radio
The tuner frequencies on this unit are allocated for use in Western Europe,
Asia, the Middle East, Africa and Oceania. Use in other areas may result in
poor reception. The RDS (radio data system) function only works in areas that
broadcast RDS signals for FM stations.
Receiving preset stations
1 Press SRC/OFF to select [RADIO].
– 7 –

English

2 Press BAND/ to select the band from [FM1], [FM2], [FM3], [MW] or [LW]. 3
Press a number button (1/ to 6/ ).

TIP

The

/

buttons can be also used to select a preset station when [SEEK] is set to
[PCH] in the

FUNCTION settings (page 24).

Best stations memory (BSM)
The six strongest stations are stored on the number buttons (1/ to 6/ ).
1 After selecting the band, press the M.C. dial to display the main menu. 2
Turn the M.C. dial to select [FUNCTION], then press to confirm. 3 Turn the
M.C. dial to select [BSM], then press to confirm.

To seek a station manually 1 After selecting the band, press / to select a
station.
Press and hold / then release to seek an available station. Scanning stops
when the unit receives a station. To cancel seek tuning, press / .
NOTE [SEEK] needs to be set to [MAN] in the FUNCTION settings (page 24).
To store stations manually 1 While receiving the station you want to store,
press and hold one of the number
buttons (1/ to 6/ ) until it stops flashing.

Using PTY functions
The unit searches for a station by PTY (program type) information.
1 Press and hold during FM reception. 2 Turn the M.C. dial to select a program
type from [NEWS/INFO], [POPULAR],
[CLASSICS] or [OTHERS].
3 Press the M.C. dial.
The unit begins to search for a station. When it is found, its program service
name is displayed.
NOTES · To cancel the search, press the M.C. dial.
– 8 –

English

· The program of some stations may differ from that indicated by the
transmitted PTY. · If no station is broadcasting the type of program you
searched for, [NOT FOUND] is displayed for
about two seconds and then the tuner returns to the original station.
CD/USB/iPhone/AUX
(iPhone source is not available when [USB MTP] is set to [ON] in the SYSTEM
settings (page 28).)
Playing back
Disconnect headphones from the device before connecting it to the unit.
CD 1 Insert a disc into the disc loading slot with the label side up.
To eject a disc, stop playback first then press .
USB devices (including AndroidTM)/iPhone 1 Open the USB port cover. 2 Plug in
the USB device/iPhone using an appropriate cable.
NOTE To automatically switch to USB source when a USB device/iPhone is
connected to the unit, set [USB AUTO] to [ON] in the SYSTEM settings (page
29).
CAUTION
Use a USB cable (sold separately) to connect the USB device as any device
connected directly to the unit will protrude out from the unit, which could be
dangerous. Before removing the device, stop playback. AOA connections A device
running Android OS 4.1 or later installed and also supports AOA (Android Open
Accessory) 2.0 can be connected to the unit via AOA, using the cable supplied
with the device. NOTE If you use an AOA connection, [APP CONTROL] needs to be
set to [WIRED] (page 28) and [USB MTP] needs to be set to [OFF] (page 28) in
the SYSTEM settings.
– 9 –

English

MTP connection A device installed with Android OS 4.0 or most of later
versions can be connected to the unit via MTP, using the cable supplied with
the device. However, depending on the connected device, OS version or the
numbers of the files in the device, audio files/songs may not be able to be
played back via MTP. Note that MTP connection is not compatible with WAV and
FLAC file formats.
NOTE If you use an MTP connection, [USB MTP] needs to be set to [ON] in the
SYSTEM settings (page 28).

AUX 1 Insert the stereo mini plug into the AUX input jack. 2 Press SRC/OFF to
select [AUX IN] as the source.
NOTE If [AUX] is set to [OFF] in the SYSTEM settings, [AUX IN] cannot be
selected as a source (page 28).

Operations

You can make adjustments in the FUNCTION settings (page 23) (except for AUX
IN/CD/ USB source). Note that the following operations do not work for an AUX
device. To operate an AUX device, use the device itself.

Purpose

Operation

Select a folder1 Select a track/song (chapter) Fast forward or reverse2

Press 1/ or 2/ .

Press

or .

Press and hold

or .

Search for a file from a list (CD/USB only)
View a list of the files in the selected folder/ category*1

1 Press and hold to display the list. 2 Turn the M.C. dial to select the
desired
file (folder) name or category, then press to confirm. 3 Turn the M.C. dial to
select the desired file, then press to confirm. Playback starts.
Press the M.C. dial when a folder/category is selected.

Play a song in the selected folder/ category*1

Press and hold the M.C. dial when a folder/ category is selected.

Repeat play Random/shuffle play

Press 6/ . Press 5/ .

Pause/resume playback

Press 4/PAUSE.

– 10 –

English

Purpose

Operation

Sound retriever*1

Press 3/S.Rtrv. [1]: Effective for low compression rates [2]: Effective for
high compression rates

Return to root folder (CD/USB only)*1

Press and hold 1/ .

Switch between compressed audio and CD- Press BAND/ . DA (CD only)

1 Compressed audio files only 2 When you use the fast forward or reverse function while playing a VBR file, the playback time may
be not correct.

Bluetooth

Bluetooth connection

Important
If ten or more Bluetooth devices (e.g. a phone and separate audio player) are
connected, they may not work properly.

TIP The next connection to the unit is performed automatically if the
Bluetooth device has been connected previously in the following steps.
1 Turn on the Bluetooth function of the device.
If you make a Bluetooth connection from the device, proceed to step 4.

2 Press

to display the [ADD DEVICE] setting.

The unit starts to search for available devices, then displays them in the
device list.

· To cancel searching, press the M.C. dial. · If the desired device is not in
the list, select [RE-SEARCH]. · If there is no device available, [NOT FOUND]
appears in the display. · If there is already a connected device, the phone
menu appears by pressing .

3 Turn the M.C. dial to select a device from the device list, then press to
confirm.

Press and hold the M.C. dial to switch the displayed device information
between the

Bluetooth device address and device name.

If you make a Bluetooth connection from the unit, proceed to step 5.

4 Select the unit name shown in the device display.

– 11 –

English

5 Make sure the same 6-digit number appears on this unit and the device, then
select [YES] if the 6-digit numbers displayed on this unit and the device are
the same.

Bluetooth telephone
First, make a Bluetooth connection with the Bluetooth telephone (page 11). Up
to two Bluetooth telephones can be connected simultaneously.
Important · Leaving the unit on standby to connect to your phone via Bluetooth
while the engine is not running
can drain the vehicle’s battery. · Be sure to park your vehicle in a safe
place and apply the parking brake before operation.

To make a phone call

1 Press

to display the phone menu.

When two phones are connected, a phone name appears first then a phone menu

will display. To switch to another phone, press

again.

2 Turn the M.C. dial to select [RECENTS] or [PHONE BOOK], then press to
confirm.

If you select [PHONE BOOK], proceed to step 4.

3 Turn the M.C. dial to select [MISSED], [DIALLED] or [RECEIVED], then press
to

confirm.

4 Turn the M.C. dial to select a name or phone number, then press to confirm.

The phone call starts.

To answer an incoming call 1 Press any button when a call is received.
TIP When two phones are connected to the unit via Bluetooth and there is an
incoming call while one phone is being used for a call, a message will appear
in the display. To answer that incoming call, you need to end the existing
call.

Basic operations

Purpose End a call
Reject an incoming call Switch between the current caller and a caller on hold

Operation

Press .

Press and hold

when a call is received.

Press the M.C. dial.

– 12 –

English

Purpose
Cancel a caller on hold
Adjust the volume of the caller’s voice (When private mode is on, this
function is not available.)
Turn the private mode on or off

Operation Press and hold . Turn the M.C. dial during the call.
Press BAND/ during the call.

To preset phone numbers 1 Select a phone number from a phone book or call
history. 2 Press and hold one of the number buttons (1/ to 6/ ).
The contact is stored in the selected preset number.
To make a call using a preset number, press one of the number buttons (1/ to
6/ ), then press the M.C. dial, while the phone menu is displayed.

Voice recognition

This function is only available when an iPhone/Android device equipped with
voice

recognition is connected to the unit via Bluetooth.

1 Press and hold

and then talk into the microphone to input voice commands.

To exit the voice recognition mode, press BAND/ .
NOTE For details on the voice recognition features, refer to the manual
supplied with your device.
TIP When a Pioneer Smart Sync connection is made (page 17), you can also use
the voice recognition function from Pioneer Smart Sync installed on your
iPhone/Android device by pressing and holding
. For details on the voice recognition features, see the application’s help
section.

Phone menu

1 Press

to display the phone menu.

Menu Item RECENTS
[MISSED] [DIALLED] [RECEIVED] PHONE BOOK

Description Display the missed call history.
Display the dialed call history. Display the received call history. Display
the contacts in your phone.

– 13 –

English

Menu Item PRESET 1-6
A.ANSR* [ON], [OFF] PB INVT DEVICELIST
DEL DEVICE [DELETE YES], [DELETE NO] ADD DEVICE DEV. INFO

Description Recall the preset phone numbers. You can also recall the preset
phone numbers by pressing one of the number buttons (1/ to 6/ ). Select [ON]
to answer an incoming call automatically.
Invert the order of names in the phone book (name view). Display the list of
paired Bluetooth devices. “*” appears on the device name when the Bluetooth
connection is established. When no device is selected in the device list, this
function is not available. Delete the device information.
Register a new device. Switch the device information on the display between
the device name and Bluetooth device address.

• If two phones are connected, this function does not work on incoming calls that are received while one of the phones is being used for a call.

Bluetooth audio
Important · Depending on the Bluetooth audio player connected to this unit,
the available operations will be
limited to the following two levels: ­ A2DP (Advanced Audio Distribution
Profile) can only play back songs on your audio player. ­ AVRCP (Audio/Video
Remote Control Profile) can perform functions such as playback, pause, select
song, etc. · The sound of the Bluetooth audio player will be muted when the
phone is in use. · When the Bluetooth audio player is in use, you cannot
connect to a Bluetooth telephone
automatically. · Depending on the type of Bluetooth audio player you have
connected to this unit, operation and
information displayed may vary based on availability and functionality.
1 Make a Bluetooth connection with the Bluetooth audio player.
2 Press SRC/OFF to select [BT AUDIO] as the source.
3 Press BAND/ to start playback.
NOTE You must reconnect the Bluetooth connection when the source is switched
or the unit is turned off.

– 14 –

English

TIP
When more than two and up to five devices are registered to the unit via
Bluetooth, you can switch the Bluetooth device by playing back songs on the
device. By doing so, playing back a song from the Bluetooth device of each
passenger is easily available. However, depending on the usage conditions,
multiple connections may not be available and the audio files/songs may not be
able to be played back properly.

Basic operations
You can make various adjustments in the FUNCTION settings (page 23).

Purpose Fast forward or reverse Select a track Repeat play Random play
Pause/resume playback Search for a file from a list

Operation

Press and hold

or .

Press

or .

Press 6/ .

Press 5/ .

Press 4/PAUSE.

1 Press and hold to display a list. 2 Turn the M.C. dial to select the desired
folder name, then press to confirm. 3 Turn the M.C. dial to select the desired
file, then press to confirm. Playback starts.

• Depending on the connected device, these operations may not be available.

Spotify®
(Not available when [USB MTP] is set to [ON] in the SYSTEM settings (page
28).) Spotify is a music streaming distribution service not affiliated with
Pioneer. More information is available at http://www.spotify.com. The Spotify
application is available for compatible smartphones, please visit https://
support.spotify.com/ for the latest compatibility information. To enjoy
Spotify as you drive, first download the Spotify app to your iPhone or Android
device. You can download it on the iTunes App Store or Google PlayTM. Choose a
free account or a paid Premium account, either in the app or at spotify.com. A
Premium account gives you more features, like offline listening.
Important · This product incorporates Spotify software which is subject to 3rd
party licenses found here:
www.spotify.com/connect/third-party-licenses. · For information on the
countries and regions where Spotify can be used, take a look at https://
spotify.com/us/select-your-country/.
– 15 –

English

Listening to Spotify
Update the firmware of the Spotify application to the latest version before
use.
1 Connect this unit with the mobile device.
· iPhone via USB (page 9) · iPhone/Android device via Bluetooth (page 11)
2 Press SRC/OFF to select [SPOTIFY].
3 Press and hold 1/ to display [APP CONTROL].
4 Turn the M.C. dial to select one of the below.
· Select [WIRED] for the USB connection. · Select [BLUETOOTH] for the
Bluetooth connection.
5 Press SRC/OFF to select [SPOTIFY].
6 Launch the Spotify application on the mobile device and start playback.
NOTE When you connect a mobile device other than an iPhone/Android device, it
may not operate correctly depending on your mobile device.

Basic operations

You can make various adjustments in the FUNCTION settings (page 23).

NOTE
The available operations may vary according to the type of contents
(track/album/artist/playlist/radio) you want to play.

Purpose

Operation

Skip a track Search for a track from a list
Pause/resume playback Thumbs Up (Only for radio) Thumbs Down (Only for radio)
Random play (Only for track/album/artist/ playlist)

Press

or .

1 Press and hold to display the list. 2 Turn the M.C. dial to select the
desired
category, then press to confirm. 3 Turn the M.C. dial to select the desired
file, then press to confirm. Playback starts.

Press 4/PAUSE.

Press 1/ .

Press 2/ .

Press 5/ .

– 16 –

English

Purpose
Repeat play (Only for track/album/artist/ playlist)
Start a radio channel based on the song currently being played.

Operation Press 6/ .
1 Press and hold 5/ to start a radio. 2 Press the M.C. dial. · This function
may not be available
depending on the selected song.

NOTE Some functions of Spotify may not be operated from the unit.

Using Pioneer Smart Sync/APP
Pioneer Smart Sync is the application that intelligently brings your maps,
messages, and music together in the vehicle. You can operate the unit from
Pioneer Smart Sync installed on an iPhone/Android device. In some cases, you
can control aspects of the application, such as source selection, pause, etc.,
by using the unit. For details on what operations are available on the
application, see the application’s help section.
NOTE The APP source is not available when a Pioneer Smart Sync connection is
not made or [USB MTP] is set to [ON] in the SYSTEM settings (page 28).
WARNING
· Functions operated with a smartphone are merely tools available to the
driver. The driver shall observe safe and sensible driving behavior under all
circumstances.
· Do not attempt to operate the application while driving. Make sure to pull
off the road and park your vehicle in a safe location before attempting to use
the controls on the application.
For iPhone users This function is compatible with iOS 10.3 or later. You can
download Pioneer Smart Sync on iTunes App Store.

– 17 –

English

For Android device users For Bluetooth connections, this function is
compatible with devices that have Android OS 5.0 or later installed. For USB
connections, this function is compatible with a phone that runs Android 5.0 or
later up to 7.1.2 and also supports AOA (Android Open Accessory) 2.0. However,
the compatibility depends on the smartphone. You can download Pioneer Smart
Sync on Google Play.
NOTE Some Android devices connected via AOA 2.0 may not work properly or emit
sounds due to their own software design, regardless of the OS version.
What kind of function does the application have?
Promoting the use of the unit The interface of the unit can be evolved by
using your iPhone/Android device. Image (example):
Examples: ­ Selecting a source of the unit ­ Listening to the music on your
iPhone/Android device ­ Controlling the sound field intuitively ­ Setting the
illumination colour ­ Controlling your connected Bluetooth device
– 18 –

English

Extending the functions of the unit by using the application
The following functions, which are unavailable on the unit alone, are
available by making a Pioneer Smart Sync connection.

Menu Item (example) Using a navigation application Message reading 31 Band EQ
setting
Super “Todoroki” Sound
Easy Sound Fit Theme setting

Description
You can specify and start the navigation application installed on your device.
You can read messages received from the apps installed on your device.
You can select an equalizer band from the 31-band graphic equalizer (13-band
for not using the Pioneer Smart Sync connection).
You can boost the bass level more dynamically than when not using the Pioneer
Smart Sync connection.
You can perform the time alignment setting easily by selecting your vehicle
type.
You can set the wall paper and the theme colour (display/keys/characters) at
once.

NOTES · Some functions may be restricted depending on the connection
conditions with the application. · The 31 Band EQ setting is converted into 13
bands when a music source from this product is engaged.
TIP It is recommended to enter the search term “Pioneer Smart Sync” in the
search field to search for the application.

Making a connection with Pioneer Smart Sync
1 Press the M.C. dial to display the main menu. 2 Turn the M.C. dial to select
[SYSTEM], then press to confirm. 3 Turn the M.C. dial to select [APP CONTROL],
then press to confirm. 4 Turn the M.C. dial to select one of the below.
· Select [WIRED] for the USB connection. · Select [BLUETOOTH] for the
Bluetooth connection.
– 19 –

English

5 Turn the M.C. dial to select [AUTO APP CONN], then press to confirm. 6 Turn
the M.C. dial to select [ON], then press to confirm. 7 Connect this unit with
the mobile device.
· iPhone/Android device via USB (page 9) · iPhone/Android device via Bluetooth
(page 11) Pioneer Smart Sync on the device starts automatically.
NOTE Regardless of whether the [AUTO APP CONN] setting is set to [ON] or
[OFF], you can also perform the following to start Pioneer Smart Sync. · For
devices other than the USB-connected Android device, press SRC/OFF to select
any source and press and hold the M.C. dial. · For iPhone, launch Pioneer
Smart Sync on the mobile device.
NOTES · When you connect a mobile device other than an iPhone/Android device,
it may not operate
correctly depending on your mobile device. · If Pioneer Smart Sync has not
been installed on your iPhone/Android device yet, a message that
prompts you to install the application will appear on your iPhone/Android
device (except for the Android device connected via Bluetooth). Select [OFF]
in [AUTO APP CONN] to clear the message (page 29).
Listening to music on your device
1 Press SRC/OFF to select [APP].
Using the Karaoke Function
WARNING
· A driver should never sing with a microphone while driving. Doing so may
result in an accident. · Do not carelessly leave a microphone for preventing
an accident.
CAUTION
It is extremely dangerous to allow the microphone lead to become wound around
the steering column, brake pedal or shift lever, which may cause an accident.
Be sure to install the microphone in such a way that it will not obstruct
driving.
NOTES · Use a commercially available dynamic mic and not the supplied
microphone. · This function is not available when the selected source is the
following.
­ RADIO ­ AUX IN
– 20 –

English

1 Insert the stereo mini plug of your microphone into the AUX input jack. 2
Press the M.C. dial to display the main menu. 3 Turn the M.C. dial to select
[MICROPHONE]. 4 Press the M.C. dial to select [ON].
When the karaoke mode is activated, the volume on the unit is muted. Adjust
the microphone volume on the [MIC VOL] setting.
To adjust the microphone volume 1 Press the M.C. dial to display the main
menu. 2 Turn the M.C. dial to select [MICROPHONE], then press to confirm. 3
Turn the M.C. dial to select [MIC VOL]. 4 Turn the M.C. dial to adjust the
volume level.
NOTE If howling occurs when using the microphone, keep the microphone away
from the speaker or lower the microphone volume.
To reduce the level of the vocals in a song 1 Press the M.C. dial to display
the main menu. 2 Turn the M.C. dial to select [MICROPHONE] then press to
confirm. 3 Turn the M.C. dial to select [VOCAL]. 4 Press the M.C. dial to
select [OFF].
NOTE Depending on the recording condition of songs, the level of vocals may
not be reduced effectively.
Audio Adjustments
You can also make various adjustments in the AUDIO settings (page 25).
Operation modes
This unit features two operation modes: network mode and standard mode. You
can switch between modes as desired (page 6).
– 21 –

English

Network mode You can create a 2-way + SW multi-amp and multi-speaker system
with high range speaker, middle range speaker and subwoofer for reproduction
of high, middle and low frequencies (bands).
Standard mode You can create a 4-speaker system with front and rear speakers
or front speakers and subwoofers, or a 6-speaker system with front and rear
speakers and subwoofers.
Adjusting the cut-off frequency value and the slope value
You can adjust the cut-off frequency value and the slope value of each
speaker. The following speakers can be adjusted.
Network mode: [HIGH] (high-range speaker HPF), [MID HPF] (middle-range speaker
HPF), [MID LPF] (middle-range speaker LPF), [SUBWOOFER] Standard mode:
[FRONT], [REAR], [SUBWOOFER] NOTE [SUBWOOFER] can only be selected when [ON]
is selected in [SUBWOOFER] (page 25).
1 Press the M.C. dial to display the main menu. 2 Turn the M.C. dial to select
[AUDIO], then press to confirm. 3 Turn the M.C. dial to select [CROSSOVER],
then press to confirm. 4 Turn the M.C. dial to select the speaker unit
(filter) to be adjusted, then press to
confirm.
5 Turn the M.C. dial to select [HPF] or [LPF] according to the speaker unit
(filter),
then press to confirm.
6 Turn the M.C. dial to select an appropriate cut-off frequency for the
speaker unit
(filter) selected in step 4, then press to confirm. Network mode: [1.25K] to
[12.5K] (if you choose [HIGH] or [MID LPF]) [25] to [250] (if you choose [MID
HPF] or [SUBWOOFER]) Standard mode: [25HZ] to [250HZ] – 22 –

English

7 Turn the M.C. dial to select an appropriate slope for the speaker unit
(filter)
selected in step 4. Network mode: [­6] to [­24] (if you choose [HIGH], [MID
HPF] or [MID LPF]) [­12] to [­36] (if you choose [SUBWOOFER]) Standard mode:
[­6] to [­24] (if you choose [FRONT] or [REAR]) [­6] to [­36] (if you choose
[SUBWOOFER])

Settings

You can adjust various settings in the main menu.
1 Press the M.C. dial to display the main menu.
2 Turn the M.C. dial to select one of the categories below, then press to
confirm.
· FUNCTION settings (page 23) · AUDIO settings (page 25) · SYSTEM settings
(page 27) · ILLUMINATION settings (page 30) · MICROPHONE settings (page 31)
3 Turn the M.C. dial to select the options, then press to confirm.

FUNCTION settings

The menu items vary according to the source.

Menu Item

Description

FM SETTING [TALK], [STANDARD], [MUSIC]

Match the sound quality level with the broadcast signal conditions of the FM
band signal. (Available only when FM band is selected.)

BSM

Store the six strongest stations on the number buttons (1/ to 6/ )
automatically.

– 23 –

English

Menu Item

Description

REGIONAL

[ON], [OFF]

Limit the reception to the specific regional programs when AF (alternative
frequencies search) is selected. (Available only when FM band is selected.)

LOCAL

FM: [OFF], [LV1], [LV2], [LV3], [LV4] Restrict the tuning station according to
the

MW/LW: [OFF], [LV1], [LV2]

signal strength.

TA

[ON], [OFF]

Receive current traffic information if available. (Available only when FM band
is selected.)

AF

[ON], [OFF]

Allow the unit to retune to a different frequency providing the same station.
(Available only when FM band is selected.)

NEWS

[ON], [OFF]

Interrupt the currently selected source with news programs. (Available only
when FM band is selected.)

SEEK

[MAN], [PCH]

Assign

or

buttons to seek the stations

one by one (manual tuning) or select a station

from the preset channels.

SAVE

Store the information about the song currently being played to your music list
on Spotify.

UNSAVE

Remove the song information stored in [SAVE].

SEL DEVICE iPhone

Connect a Bluetooth device in the list.

PLAY

Start playback.

STOP

Stop playback.

– 24 –

English

AUDIO settings

NOTE [CHK APP SETTG.] may be displayed when the setting is performed from
Pioneer Smart Sync.

Menu Item
EQ SETTING
[SUPER BASS], [POWERFUL], [DYNAMIC], [NATURAL], [VOCAL], [VIVID], [SET BY
APP], [CUSTOM1], [CUSTOM2], [FLAT] [SET BY APP] is displayed when the
preset equalizer curve that is not available in the unit has been set from
Pioneer Smart Sync.

Description
Select or customise the equalizer curve. · When you select a setting other
than
[CUSTOM1], [CUSTOM2] and [SET BY APP], you can also customise the equalizer
curve by pressing and holding the M.C. dial, then store the customised
equalizer curve in [CUSTOM1].

Select an equalizer band and level for further customising. Equalizer band:
[50HZ] to [12.5kHZ] Equalizer level: [­6] to [+6] FADER* (Only for standard
mode)
BALANCE
SUBWOOFER [ON], [OFF]

Adjust the front and rear speaker balance. Adjust the left and right speaker
balance. Set to [ON] when using a subwoofer speaker.

SUBWOOFER [NOR], [REV]

Select the subwoofer phase.

SPEAKER LEVEL

Network mode: [HIGH L], [HIGH Select a speaker unit (filter) and adjust the

R], [MID L], [MID R], [SUBWOOFER] output level.

Standard mode: [FRONT L],

· Each value you have adjusted changes when

[FRONT R], [REAR L], [REAR R],

you change the [POSITION] setting (page 26).

[SUBWOOFER]

Output level: [­24] to [10]

– 25 –

English

Description

CROSSOVER

Select a speaker unit (filter) to adjust the HPF or LPF cut-off frequency and
the slope for each speaker unit. For details on the [CROSSOVER] setting, see
page 22.

POSITION

[OFF], [FRONT LEFT] (front seat Select a listening position to adjust the
speakers’

left), [FRONT RIGHT] (front seat output levels automatically and add a delay
time

right), [FRONT] (front seats), [ALL]* that corresponds to the number and
locations of

• Only for standard mode

occupied seats.

TIME ALGNMNT

[INITIAL], [OFF], [CUSTOM]

Select or customise the time alignment settings

to reflect the distance between the listener’s

Select a type of speaker and

position and each speaker.

adjust the speaker distance for · Select [INITIAL] to initialize the setting
value.

further customising in [CUSTOM]. · Select [OFF] to reset all setting values to
0.

Network mode: [HIGH L], [HIGH · The [CUSTOM] setting is available when

R], [MID L], [MID R], [SUBWOOFER] [FRONT LEFT] or [FRONT RIGHT] is selected in

Standard mode: [FRONT L],

[POSITION] (page 26). [FRONT R], [REAR L], [REAR R],

· The [CUSTOM] setting is not available when

[SUBWOOFER] [OFF] is selected in [SUBWOOFER] (page 25).

Speaker distance (cm): [350] to

[0.0]

SAVE SETTINGS

[YES], [NO]

Save to later recall the following sound settings at their current values:
[CROSSOVER], [SPEAKER LEVEL], [EQ SETTING], [POSITION], [TIME ALGNMNT],
[D.BASS], [SUBWOOFER]. · The settings that can be saved differ when a
Pioneer Smart Sync connection is made.

LOAD SETTINGS

Load the sound settings, when you have already performed [SAVE SETTINGS].

D.BASS

[OFF], [LOW], [HI]

Boost the bass level dynamically to offer an effect as if a subwoofer was
added to the system.

LOUDNESS [OFF], [LOW], [MID], [HI]

Compensate for clear sound at low volume.

– 26 –

English

Menu Item SLA
[+4] to [­4] S.RTRV [1] (effective for low compression rates), [2] (effective
for high compression rates), [OFF]

Description
Adjust the volume level for each source except FM. Each of the below
combinations are set to the same setting automatically. · When making a USB
connection, set USB,
iPhone, APP, and SPOTIFY. · When making a Bluetooth connection, set BT
AUDIO, iPhone, APP, and SPOTIFY.
Enhance compressed audio and restore rich sound. · This setting is not
available when [OFF] is
selected in [VOCAL] in the MICROPHONE settings (page 31).

• Not available when [SW] is selected in [REAR-SP] in the INITIAL settings (page 7).

SYSTEM settings

You can also access to these menus when the unit is turned off.

Menu Item LANGUAGE
ENG, , TUR, FRA, DEU
CLOCK SET [12H], [24H] SCROLL SET [ONCE], [LOOP], [OFF] BEEP TONE (Only for
standard mode) [ON], [OFF]

Description
Select the language to display the text information from a compressed audio
file.
Set the clock (page 6). · This setting is not available when a Pioneer
Smart Sync connection is made.
Select the way to scroll the text in the display window.
A beep can be heard when any button is pushed. Select [OFF] to disable this
function.

– 27 –

English

Menu Item INFO DISPLAY
[SPEANA/CLOCK], [LIVE FX/ CLOCK], [CLOCK], [SPEANA], [LEVEL METER], [OFF] AUTO
PI [ON], [OFF] AUX [ON], [OFF] BT AUDIO [ON], [OFF] SPOTIFY [ON], [OFF] PW
SAVE* [ON], [OFF] BT MEM CLEAR [YES], [NO] APP CONTROL [WIRED], [BLUETOOTH]
USB MTP [ON], [OFF]

Description
Display the item on the sub information display.
Search for a different station with the same programming, even if using a
preset station.
Set to [ON] when using an auxiliary device connected to the unit. · This
setting is not available when [ON] is
selected in [MICROPHONE] in the MICROPHONE settings (page 31).
Set the Bluetooth signal on/off.
Set to [ON] when using the Spotify function.
Reduce the battery power consumption. Turning on the source is the only
operation allowed when this function is on.
Clear the Bluetooth device data (device list, PIN code, call history, phone
book, preset phone numbers) stored in the unit. [CLEARED] appears when data is
successfully deleted.
Select the appropriate connection method according to your device. See page 29
for details on the connections for each device.
Set to [ON] when using the MTP connection. The following sources are not
available when the setting is set to [ON]. · APP, SPOTIFY, iPhone, and USB
(AOA)

– 28 –

English

Menu Item AUTO APP CONN
[ON], [OFF] USB AUTO [ON], [OFF]

Description
Select [ON] to automatically launch Pioneer Smart Sync when the iPhone/Android
device is connected to the unit.
Select [ON] to automatically switch to USB source when a USB device/iPhone is
connected to the unit. Select [OFF] when a USB device/iPhone is being
connected to the unit just for charging.

• [PW SAVE] is canceled if the vehicle battery is disconnected and will need to be turned back on once the battery is reconnected. When [PW SAVE] is off, depending on connection methods, the unit may continue to draw power from the battery if your vehicle’s ignition does not have an ACC (accessory) position.

Information on the connections for each device
The available sources differ depending on the setting value. Please set [APP
CONTROL] according to the table for the source you want to use. For details on
Pioneer Smart Sync connection, see page 17.
When Pioneer Smart Sync connection is NOT performed

Setting Value [WIRED] [BLUETOOTH]

Device iPhone Android iPhone Android

Available source(s) iPhone, SPOTIFY USB (AOA) iPhone, SPOTIFY SPOTIFY

When Pioneer Smart Sync connection is performed

Setting Value [WIRED] [BLUETOOTH]

Device iPhone Android iPhone Android

Available source(s) APP, SPOTIFY APP APP, SPOTIFY APP, SPOTIFY

– 29 –

English

ILLUMINATION settings

Menu Item COLOUR
[KEY COLOUR], [DISP COLOUR], [BOTH COLOUR] DIM SETTING [SYNC ILLUMI], [SYNC
CLOCK], [MANUAL] BRIGHTNESS [KEY], [DISP] PHONE COLOUR [FLASHING] [FLASH FX1]
to [FLASH FX6] [OFF]

Description
Select colour for the keys/display of the unit from 12 preset colours, [SCAN]
or [CUSTOM]. · [SCAN]: Cycle through a variety of colours
automatically. · [CUSTOM]: 1 Press and hold the M.C. dial until the colour
setting display appears. 2 Set the primary colour (R (red)/G (green)/B
(blue)) and brightness level ([0] to [60]). You cannot select a level below 10
for all three of R (red), G (green), B (blue) at the same time. You can also
customise the preset colours. Select one of the preset colours, then press and
hold the M.C. dial until the colour setting display appears. * The CUSTOM
setting is only available for [KEY COLOUR] and [DISP COLOUR].
Select the way to change the display brightness.
Select the brightness for the keys/display of the unit from [1] to [10]. The
available setting ranges differ depending on [DIM SETTING].
Select the key colour when a call is received. Applies the colour set by [KEY
COLOUR]. · The illumination effect differs depending on
the selection of [ON] or [OFF] in [ILLUMI FX]. Cycle through a variety of
colours automatically. No change in key colour made.

– 30 –

English

Menu Item ILLUMI FX
[ON], [OFF]

Description
The illumination effect can be seen when: ­ there is an incoming call when
[FLASHING] is
selected in [PHONE COLOUR] ­ you are on a phone call ­ the message received on
the device is being
read when a Pioneer Smart Sync connection is made ­ a CD is inserted/ejected
The illumination effect will activate when the ACC power is turned on/off
regardless of this setting.

MICROPHONE settings

Menu Item MICROPHONE
[ON], [OFF] MIC VOL VOCAL
[ON], [OFF]

Description
Set to [ON] when using the karaoke function. Adjust the microphone volume.
Set to [OFF] when reducing the level of the vocals in a song.

– 31 –

Additional Information

English

Troubleshooting
The display automatically returns to the normal display. No operations have
been made for
about 30 seconds. ­ Perform an operation.
The repeat play range changes unexpectedly. Depending on the repeat play
range,
the selected range may change when another folder or track is being selected
or during fast forwarding/reversing. ­ Select the repeat play range again.
A subfolder is not played back. Subfolders cannot be played when
[FLD] (folder repeat) is selected. ­ Select another repeat play range.
The sound is intermittent. You are using a device, such as a cellular
phone, that may cause audible interference. ­ Move electrical devices that may
be
causing the interference away from the unit.
The sound from the Bluetooth audio source is not played back. There is a call
in progress on a
Bluetooth-connected cellular phone. ­ The sound will be played back when
the call is terminated. A Bluetooth-connected cellular phone
is currently being operated. ­ Stop using the cellular phone. The connection
between the unit and the cellular phone is not established correctly after a
call made by a Bluetooth-connected cellular phone.

­ Make a Bluetooth connection between the unit and the cellular phone again.
Error messages
Common
AMP ERROR This unit fails to operate or the speaker
connection is incorrect. The protective circuit is activated.
­ Check the speaker connection. ­ Turn the ignition switch OFF and back
to ON again. If the message remains, contact your dealer or an authorized
Pioneer Service Station for assistance.
NO XXXX (NO TITLE, for example) There is no embedded text information.
­ Switch the display or play another track/file.
CD player
ERROR-07, 11, 12, 17, 30 The disc is dirty.
­ Clean the disc. The disc is scratched.
­ Replace the disc.
ERROR-07, 10, 11, 12, 15, 17, 30, A0 There is an electrical or mechanical
error. ­ Turn the ignition switch OFF and back
to ON, then back to the CD player.
ERROR-15 The inserted disc is blank.
­ Replace the disc.
ERROR-23 Unsupported CD format.
­ Replace the disc.

– 32 –

English

FORMAT READ Sometimes there is a delay between the
start of playback and when you start to hear any sound. ­ Wait until the
message disappears and
you hear sound.
NO AUDIO The inserted disc does not contain any
playable files. ­ Replace the disc.
SKIPPED The inserted disc contains DRM
protected files. ­ The protected files are skipped.
PROTECT All the files on the inserted disc are
embedded with DRM. ­ Replace the disc.
USB device/iPhone
FORMAT READ Sometimes there is a delay between the
start of playback and when you start to hear any sound. ­ Wait until the
message disappears and
you hear sound.
NO AUDIO There are no songs.
­ Transfer the audio files to the USB device and connect.
The connected USB device has security enabled. ­ Follow the USB device
instructions to disable the security.
SKIPPED The connected USB device contains
DRM protected files. ­ The protected files are skipped.
PROTECT All the files on the connected USB
device are embedded with DRM.

­ Replace the USB device.
N/A USB The connected USB device is not
supported by this unit. ­ Disconnect your device and replace it
with a compatible USB device.
HUB ERROR The USB device connected via a USB
hub is not supported by this unit. ­ Connect the USB device directly to this
unit using a USB cable.
CHECK USB The USB connector or USB cable has
short-circuited. ­ Check that the USB connector or USB
cable is not caught in something or damaged. The connected USB device consumes
more than maximum allowable current. ­ Disconnect the USB device and do not
use it. Turn the ignition switch OFF and back to ACC or ON. Connect only
compliant USB devices.
ERROR-19 Communication failed.
­ Perform one of the following operations, then return to the USB source. ·
Disconnect the USB device. · Change to a different source.
iPhone failure. ­ Disconnect the cable from the iPhone. Once the iPhone’s main
menu is displayed, reconnect the iPhone and reset it.
ERROR-23 USB device was not formatted properly.
­ Format the USB device with FAT12, FAT16 or FAT32.
ERROR-16 The iPhone firmware version is old.
­ Update the iPhone version.

– 33 –

English

iPhone failure. ­ Disconnect the cable from the iPhone. Once the iPhone’s main
menu is displayed, reconnect the iPhone and reset it.
STOP There are no songs in the current list.
­ Select a list that contains songs.
NO BT DEVICE GO TO BT MENU TO REGISTER No Bluetooth device found.
­ Connect the unit and iPhone via Bluetooth (page 11).
CONN. FAILED PRESS BAND KEY TO RETRY Bluetooth connection with iPhone
failed. ­ Press BAND/ to make a
connection again.
DISCONNECTED PRESS BAND KEY TO RETRY Bluetooth connection lost.
­ Press BAND/ to make a connection again.
Bluetooth device
ERROR-10 The power failed for the Bluetooth
module of the unit. ­ Turn the ignition switch OFF and back
to ACC or ON.
APP
CONNECT APP Pioneer Smart Sync connection is not
made. ­ Make a connection with Pioneer Smart
Sync (page 17).

Spotify
NOT FOUND The Spotify application has not started
running yet. ­ Start up the Spotify application.
NO BT DEVICE GO TO BT MENU TO REGISTER No Bluetooth device found.
­ Connect the unit and the device via Bluetooth (page 11).
CONN. FAILED PRESS BAND KEY TO RETRY Bluetooth connection failed.
­ Press BAND/ to make a connection again.
CHECK APP PRESS BAND KEY TO RETRY Connection to the Spotify application
failed. ­ Press BAND/ to make a
connection again.
DISCONNECTED PRESS BAND KEY TO RETRY Bluetooth connection lost.
­ Press BAND/ to make a connection again.
CHECK APP An unknown error (including
communication error) has occurred. ­ Follow the instructions that appear on
the screen.
Handling guidelines
Discs and player
· Use only discs that feature either of the following two logos.

– 34 –

English

· Use 12-cm discs. · Use only conventional, fully circular discs. · The
following types of discs cannot be
used with this unit: ­ DualDiscs ­ 8-cm discs: Attempts to use such discs
with an adaptor may cause the unit to malfunction. ­ Oddly shaped discs ­
Discs other than CDs ­ Damaged discs, including discs that are cracked,
chipped or warped ­ CD-R/RW discs that have not been finalized · Do not write
on or apply chemicals to the surface of the discs. · To clean a CD, wipe the
disc with a soft cloth outward from the center. · Condensation may temporarily
impair the player’s performance. Let it rest for about one hour to adjust to a
warmer temperature. Also, wipe any damp discs off with a soft cloth. · When
using discs that can be printed on label surfaces, check the instructions and
the warnings of the discs. Depending on the discs, inserting and ejecting may
not be possible. Using such discs may result in damage to this equipment. · Do
not attach commercially available labels or other materials to the discs. ­
The discs may warp making the disc unplayable. ­ The labels may come off
during playback and prevent ejection of the discs, which may result in damage
to the equipment.
USB storage device
· Connections via USB hubs are not supported.
· Firmly secure the USB storage device before driving. Do not let the USB
storage device fall onto the floor, where it may become jammed under the brake
or accelerator pedal.

· Depending on the USB storage device, the following problems may occur. ­
Operations may vary. ­ The storage device may not be recognized. ­ Files may
not be played back properly. ­ The device may cause audible interference when
you are listening to the radio.
iPhone
· Do not leave the iPhone in places with high temperatures.
· Firmly secure the iPhone when driving. Do not let the iPhone fall onto the
floor, where it may become jammed under the brake or accelerator pedal.
· Incompatible text saved on the iPhone will not be displayed by the unit.
Compressed audio compatibility
· Only the first 32 characters can be displayed as a file name (including the
file extension) or a folder name.
· The unit may not work properly depending on the application used to encode
WMA files.
· There may be a slight delay at the start of the playback of audio files
embedded with image data, or audio files stored on a USB device with numerous
folder hierarchies.
· Russian text to be displayed on this unit should be encoded in one of the
following character sets: ­ Unicode (UTF-8, UTF-16) ­ A character set other
than Unicode that is used in a Windows environment and is set to Russian in
the multi-language setting

– 35 –

English

CAUTION
· Pioneer cannot guarantee compatibility with all USB mass storage devices,
and assumes no responsibility for any loss of data on media players,
smartphones, or other devices while using this product.
· Do not leave discs or a USB storage device in any place that is subject to
high temperatures.

WMA files
File extension Bit rate
Sampling frequency
Windows MediaTM Audio Professional, Lossless, Voice/DRM Stream/Stream with
video

.wma
48 kbps to 320 kbps (CBR), 48 kbps to 384 kbps (VBR)
32 kHz, 44.1 kHz, 48 kHz
Not compatible

MP3 files

File extension Bit rate
Sampling frequency
Compatible ID3 tag version
M3u playlist MP3i (MP3 interactive), mp3 PRO

.mp3
8 kbps to 320 kbps (CBR), VBR
8 kHz to 48 kHz (32 kHz, 44.1 kHz, 48 kHz for emphasis)
1.0, 1.1, 2.2, 2.3, 2.4 (ID3 tag Version 2.x is given priority over Version
1.x.)
Not compatible
Not compatible

WAV files
· WAV file formats cannot be connected via MTP.

File extension Quantization bits

.wav 8 and 16 (LPCM)

Sampling frequency 16 kHz to 48 kHz (LPCM)

AAC files

Compatible format

AAC encoded by iTunes

File extension

.m4a

Sampling frequency 11.025 kHz to 48 kHz

Stereo Bit Rate

16 kbps to 320 kbps, VBR

Apple Lossless

Not compatible

AAC file bought from Not compatible the iTunes Store (.m4p file extension)

FLAC files
· FLAC file formats cannot be connected via MTP.
· FLAC files may not be playable, depending on the encoder.

File extension Sampling frequency
Quantization bit rate Channel mode

.flac, .fla 8/11.025/12/16/22.05/ 24/32/44.1/48/96 kHz 8/16/24 bit 1/2 ch

Disc
· Regardless of the length of the blank section between the songs from the
original recording, compressed audio discs play with a short pause between
songs.

Playable folder hierarchy
Playable folders Playable files File system
Multi-session playback

Up to eight tiers (A practical hierarchy is less than two tiers.)
Up to 99
Up to 999
ISO 9660 Level 1 and 2, Romeo, Joliet
Compatible

– 36 –

English

Packet write data transfer

Not compatible

USB device
· There may be a slight delay when starting playback of audio files on a USB
storage device with numerous folder hierarchies.

Playable folder hierarchy

Up to eight tiers (A practical hierarchy is less than two tiers.)

Playable folders

Up to 1 500

Playable files

Up to 15 000

Playback of copyright- Not compatible protected files

Partitioned USB device

Only the first partition can be played.

iPhone compatibility
This unit supports only the following iPhone models. Older versions may not be
supported. Made for ­ iPhone XR ­ iPhone XS Max ­ iPhone XS ­ iPhone X ­
iPhone 8 ­ iPhone 8 Plus ­ iPhone 7 ­ iPhone 7 Plus ­ iPhone SE ­ iPhone 6s ­
iPhone 6s Plus ­ iPhone 6 ­ iPhone 6 Plus ­ iPhone 5s · Operations may vary
depending on the
generation and/or software version of the iPhone. · Users of iPhone with the
Lightning Connector should use the Lightning to USB Cable (supplied with
iPhone). · Refer to the iPhone manuals for information about the file/format
compatibility.

· Audiobook, Podcast: Compatible CAUTION
Pioneer accepts no responsibility for data lost on the iPhone, even if that
data is lost while this unit is used.
Sequence of audio files
The user cannot assign folder numbers and specify playback sequences with this
unit. Sequence of audio file depends on the connected device. Note that the
hidden files in a USB device cannot be played back. Example of a hierarchy
Folder Compressed audio file
01 to 05: Folder number to : Playback sequence

– 37 –

English

Russian character chart
D: Display C: Character

Copyright and trademark

Bluetooth The Bluetooth® word mark and logos are registered trademarks owned
by Bluetooth SIG, Inc. and any use of such marks by PIONEER CORPORATION is
under license. Other trademarks and trade names are those of their respective
owners. iTunes Apple and iTunes are trademarks of Apple Inc., registered in
the U.S. and other countries. WMA Windows Media is either a registered
trademark or trademark of Microsoft Corporation in the United States and/or
other countries.

This product includes technology owned by Microsoft Corporation and cannot be
used or distributed without a license from Microsoft Licensing, Inc.
FLAC Copyright © 2000-2009 Josh Coalson Copyright © 2011-2014 Xiph.Org
Foundation Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met: ­
Redistributions of source code must
retain the above copyright notice, this list of conditions and the following
disclaimer. ­ Redistributions in binary form must reproduce the above
copyright notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution. ­ Neither
the name of the Xiph.org Foundation nor the names of its contributors may be
used to endorse or promote products derived from this software without
specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT
HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
IN CONTRACT, STRICT LIABILITY, OR TORT

– 38 –

English

(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
iPhone and Lightning Use of the Made for Apple badge means that an accessory
has been designed to connect specifically to the Apple product(s) identified
in the badge, and has been certified by the developer to meet Apple
performance standards. Apple is not responsible for the operation of this
device or its compliance with safety and regulatory standards. Please note
that the use of this accessory with an Apple product may affect wireless
performance. iPhone and Lightning are trademarks of Apple Inc., registered in
the U.S. and other countries.
Siri Works with Siri through the microphone.
GoogleTM, Google Play, Android Google, Google Play and Android are trademarks
of Google LLC.
Spotify® SPOTIFY and the Spotify logo are among the registered trademarks of
Spotify AB. Compatible mobile digital devices and premium subscription
required, where available, see https://www.spotify.com.
T-Kernel 2.0 This product uses the source code of TKernel 2.0 under T-License
2.0 granted by T-Engine Forum (www.tron.org).
MP3 Copyright (C) 1998-2009 PacketVideo
Licensed under the Apache License, Version 2.0 (the “License”); you may not
use this file except in compliance with the License. You may obtain a copy of
the License at

http://www.apache.org/licenses/LICENSE2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an “AS IS” BASIS, WITHOUT
WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
License for the specific language governing permissions and limitations under
the License.

Specifications

General
Power source: 14.4 V DC (10.8 V to 15.1 V allowable)
Grounding system: Negative type Maximum current consumption: 10.0 A Dimensions
(W × H × D):
DIN Chassis: 178 mm × 100 mm × 165 mm Nose: 188 mm × 118 mm × 16 mm D Chassis:
178 mm × 100 mm × 165 mm Nose: 170 mm × 96 mm × 16 mm Weight: 1.3 kg
Audio
Maximum power output: · 50 W × 4 ch/4 (for no subwoofer) · 50 W × 2 ch/4 + 70
W × 1 ch/2 (for subwoofer)
Continuous power output: 22 W × 4 (50 Hz to 15 000 Hz, 5 % THD, 4 load, both
channels driven)
Load impedance: 4 (4 to 8 (2 for 1 ch) allowable)
Preout maximum output level: 2.0 V Equalizer (13-Band Graphic Equalizer):
Frequency: 50 Hz/80 Hz/125 Hz/200 Hz/315 Hz/500 Hz/800 Hz/1.25 kHz/2 kHz/3.15
kHz/5 kHz/8 kHz/12.5 kHz Gain: ±12 dB (2 dB step)

– 39 –

English

High pass filter (Standard mode): Frequency: 25 Hz/31.5 Hz/40 Hz/50 Hz/63
Hz/80 Hz/100 Hz/125 Hz/160 Hz/200 Hz/250 Hz Slope: ­6 dB/oct, ­12 dB/oct, ­18
dB/ oct, ­24 dB/oct, OFF
Subwoofer/Low pass filter (Standard mode): Frequency: 25 Hz/31.5 Hz/40 Hz/50
Hz/63 Hz/80 Hz/100 Hz/125 Hz/160 Hz/200 Hz/250 Hz Slope: ­6 dB/oct, ­12
dB/oct, ­18 dB/ oct, ­24 dB/oct, ­30 dB/oct, ­36 dB/ oct, OFF Gain: +10 dB to
­24 dB (1 dB step) Phase: Normal/Reverse
Speaker level (Standard mode): +10 dB to ­24 dB (1 dB step)
Time alignment (Standard mode): 0 cm to 350 cm (2.5 cm/Step)
High pass filter (HIGH) (Network mode): Frequency: 1.25 kHz/1.6 kHz/2 kHz/ 2.5
kHz/3.15 kHz/4 kHz/5 kHz/6.3 kHz/ 8 kHz/10 kHz/12.5 kHz Slope: ­6 dB/oct, ­12
dB/oct, ­18 dB/ oct, ­24 dB/oct
High pass filter (MID) (Network mode): Frequency: 25 Hz/31.5 Hz/40 Hz/50 Hz/63
Hz/80 Hz/100 Hz/125 Hz/160 Hz/200 Hz/250 Hz Slope: ­6 dB/oct, ­12 dB/oct, ­18
dB/ oct, ­24 dB/oct, OFF
Low pass filter (MID) (Network mode): Frequency: 1.25 kHz/1.6 kHz/2 kHz/ 2.5
kHz/3.15 kHz/4 kHz/5 kHz/6.3 kHz/ 8 kHz/10 kHz/12.5 kHz Slope: ­6 dB/oct, ­12
dB/oct, ­18 dB/ oct, ­24 dB/oct, OFF
Subwoofer (Network mode): Frequency: 25 Hz/31.5 Hz/40 Hz/50 Hz/63 Hz/80 Hz/100
Hz/125 Hz/160 Hz/200 Hz/250 Hz Slope: ­12 dB/oct, ­18 dB/oct, ­24 dB/ oct, ­30
dB/oct, ­36 dB/oct, OFF Gain: +10 dB to ­24 dB (1 dB step) Phase:
Normal/Reverse

Speaker level (Network mode): +10 dB to ­24 dB (1 dB step)
Time alignment (Network mode): 0 cm to 350 cm (2.5 cm/Step)
CD player
System: Compact disc audio system Usable discs: Compact disc Signal-to-noise
ratio: 94 dB (1 kHz) (IEC-A
network) Number of channels: 2 (stereo) MP3 decoding format: MPEG-1 & 2 Audio
Layer 3 WMA decoding format: Ver. 7, 8, 9, 9.1, 9.2
(2 ch audio) AAC decoding format: MPEG-4 AAC (iTunes
encoded only) (Ver. 10.6 and earlier) WAV signal format: Linear PCM (Non-
compressed)
USB
USB standard specification: USB 2.0 full speed
Maximum current supply: 1.5 A USB Protocol:
MSC (Mass Storage Class) MTP (Media Transfer Protocol) AOA (Android Open
Accessory) 2.0 File system: FAT12, FAT16, FAT32 MP3 decoding format: MPEG-1 &
2 Audio Layer 3 WMA decoding format: Ver. 7, 8, 9, 9.1, 9.2 (2 ch audio) AAC
decoding format: MPEG-4 AAC (iTunes encoded only) (Ver. 10.6 and earlier) FLAC
decoding format: v1.2.1 (Free Lossless Audio Codec) WAV signal format: Linear
PCM (Noncompressed)
FM tuner
Frequency range: 87.5 MHz to 108.0 MHz Usable sensitivity: 11 dBf (1.0 V/75 ,
mono, S/N: 30 dB) Signal-to-noise ratio: 65 dB (IEC-A network)

– 40 –

English

MW tuner
Frequency range: 531 kHz to 1 602 kHz Usable sensitivity: 25 V (S/N: 20 dB)
Signal-to-noise ratio: 60 dB (IEC-A network)
LW tuner
Frequency range: 153 kHz to 281 kHz Usable sensitivity: 28 V (S/N: 20 dB)
Signal-to-noise ratio: 60 dB (IEC-A network)
Bluetooth
Version: Bluetooth 4.0 certified Output power: +4 dBm Maximum (Power
class 2) BLE (Bluetooth Low Energy) Version: 4.0
certified BLE (Bluetooth Low Energy) Output power:
+3 dBm Maximum Frequency band(s): 2 400 MHz to 2 483.5
MHz Bluetooth profiles:
GAP (Generic Access Profile) SDAP (Service Discovery Application Profile) HFP
(Hands Free Profile) 1.6 PBAP (Phone Book Access Profile) A2DP (Advanced Audio
Distribution Profile) AVRCP (Audio/Video Remote Control Profile) 1.5 SPP
(Serial Port Profile) 1.1 NOTE Specifications and the design are subject to
modifications without notice.
– 41 –

References

• Spotify — Web Player: Music for everyone
• Select your country or region — Spotify
• Support — Spotify
• Spotify — Web Player: Music for everyone
• Third Party Licenses | Spotify for Developers
• TRON Forum
• Select your country or region — Spotify
• Support — Spotify
• Spotify — Web Player: Music for everyone

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>