-
Consumer services
>
-
User manual, instruction for use
>
-
Linen Care
>
-
Steam generator
>
User manual and frequently asked questions EXPRESS PROTECT SV9202E0
Ultra powerful, 100% safe for all fabrics*
Boasting ultra-powerful steam for excellent results on any fabric, the Tefal Express Protect steam generator iron produces fast and dependable ironing time after time. 7.5 bars of high-pressure steam come together with a continuous output of up to 130 g/minute and an intense 520 g/minute steam boost to tackle even the most stubborn creases. Safe for any ironable fabric with no risk of burning, this high-efficiency steam station features the No-Setting system to ensure safe results every time.
Reference : SV9202E0
Frequent questions
Choose a board that is height-adjustable to adjust it to your height. It should be steady and robust so that you can place the ironing appliance on it.
The board should be perforated to allow the steam to pass through the fibres of the fabric to soften it and make ironing easier. The ironing board cover should also be suitable to allow the flow of steam through.
To avoid damaging the soleplate, follow this advice:
• Always place your iron on its heel rest or its base (depending on model).
• Avoid ironing over abrasive items (buttons, zip fastenings, etc.).
• Never clean your iron’s soleplate with abrasive or metallic pads.
Shiny marks can appear on some fabrics, especially on dark coloured fabrics. We would advise ironing dark clothes inside out and using the correct temperature.
If ironing mixed-fibre fabrics, set the temperature for the most fragile fibre.
Important: The iron takes longer to cool down than to heat up. We recommend that you start with fabrics to be ironed at a low temperature.
• Untreated tap water:
Your appliance has been designed to use untreated tap water.
If your water is very hard, mix 50% untreated tap water and 50% distilled water.
• Types of water not to use:
Heat concentrates the elements contained in water during evaporation. The types of water listed below may contain organic waste, mineral or chemical elements that can cause spitting, brown staining or premature wear of the appliance:
— water from clothes dryers
— scented or softened water
— water from refrigerators, batteries, air conditioners
— rain water
— boiled, filtered or bottled water
In order to ensure the best performance from your iron, these types of water should not be used for ironing.
The steam is more or less significant depending on the temperature setting of the iron. We advise you to use steam occasionally when the temperature is set low on the iron, otherwise drops of water could appear on your laundry.
Before cleaning, ensure that the appliance is unplugged and that the soleplate and iron rest plate are cold.
Do not use any detergents or descaling products to clean the soleplate or base unit. Never hold the iron or its base unit under tap water.
• Cleaning the base unit:
Clean the plastic parts from time to time with a soft, slightly damp cloth.
• Cleaning the scale collector:
Wait until the appliance has been switched off for at least 1 hour.
Remove the scale collector by lifting and rotating the flap a quarter turn.
Rinse the scale collector under the tap and put it back on the iron.
• Self-cleaning of the soleplate (depending on model):
When the anti-calc indicator blinks, perform the steps described in this video.
It is normal. Your iron generates a lot of steam; this steam is condensing on the board. Some waterdrops could appeared underneath the ironing board and fall on the flooring.
• You are using chemical descaling products or additives in the water. You should never put these products in the water tank. If this is the case, contact an approved service centre.
• Your washing has not been rinsed sufficiently or you are ironing a new item of clothing before washing it. Ensure that you have rinsed your clothes thoroughly in order to to remove soap deposits or chemicals from new garments which could stick to the iron.
• Your iron is too hot, see our recommendations on temperature control settings in your product manual.
• You are using starch. Only spray starch on the reverse of the fabric to be ironed.
Some laundry starches and synthetic fibres may stick to the surface of the iron. Please clean the Iron’s surface.
The internal parts may make metallic noises with the change in temperature. There is nothing wrong with it.
After following the instructions in the user manual for starting the appliance, make sure that your electrical socket is working by plugging another appliance. If it still does not work, do not try to dismantle or repair the appliance yourself, instead, take it to an approved repair centre
Do not use your appliance. To avoid any danger, have it replaced by an approved repair centre.
No, it is normal to have noise and vibration when the steam is activated. The use of steam triggers the functioning of an electric pump.
If the temperature of your iron is adjustable (depending on the model), use steam occasionally when the temperature is set low on the iron.
The temperature is set too low on your iron, it does not allow you to have steam.
Yes, this is quite normal. The water flow allows the cleaning of the soleplate interior.
The self-cleaning operation of the soleplate has to be performed. Refer to the chapter «Maintenance and cleaning», «How to descale my steam generator?».
Yes, this is quite normal. The self-cleaning operation causes the electric pump to operate.
No. The two cables are separately insulated; they are protected and rigorously checked. However, if you notice that the cable is damaged, have it repaired by an approved repair centre.
This system prevents the soleplate from clogging. Its active coating eliminates fibres and impurities that often become stuck to the plate and end up reducing its glide.
Your appliance contains valuable materials which can be recovered or recycled. Leave it at a local civic waste collection point.
Please go to the “Accessories” section of the website to easily find whatever you need for your product.
Find more detailed information in the Guarantee section of this website.
If you believe that one part is missing, please call Consumer Services Center and we will help you find a suitable solution.
EN
Express Protect — SV92
EN
Summary
1. Safety instructions ………………………………………………………………………… 5
2. USING YOUR APPLIANCE …………………………………………………………… 12
2.1 Gettingstarted…………………………………………………………………….. 12
2.2 Filling the water tank …………………………………………………………16
2.3 Transportation ……………………………………………………………………… 18
2.4 Settings …………………………………………………………………………………. 19
2.5 Vertical steaming ………………………………………………………………… 23
2.6 Auto-o ………………………………………………………………………………… 25
3. MAINTENANCE AND STORAGE ………………………………………………… 27
3.1 Emptying the scale collector …………………………………………….. 27
3.2 Rinsing the boiler ………………………………………………………………… 29
3.3 Cleaning ……………………………………………………………………………….. 32
3.4 Storage ………………………………………………………………………………….33
4. TROUBLESHOOTING …………………………………………………………………… 34
4
5
Safety instructions
• Please read these instructions carefully before rst use.
This product has been designed for domestic and indoor
use only. Any commercial use, inappropriate use or failure
to comply with the instructions, the manufacturer accepts
no responsibility and the guarantee will not apply.
• Never unplug the appliance by pulling the power cord.
Always unplug your appliance:
– before lling the water tank or rinsing the boiler,
– before cleaning the appliance,
– after each use.
• The appliance will not work without the limescale
collector (depending on model).
• The appliance must be used and placed on a at, stable,
heat and water resistant surface. When you place the iron
on the iron rest, make sure that the surface on which you
place it is stable.
• This appliance is not intended to be used by persons
(including children) with reduced or impaired physical,
sensory or mental capabilities or persons lacking
appropriate knowledge or experience, unless a person
responsible for their safety provides either supervision or
appropriate instructions concerning use of the appliance
prior to its use.
• Children should be supervised to ensure they do not play
with the appliance.
• This appliance may be used by children aged 8 or over and
persons lacking appropriate knowledge or experience
Important recommendations
6
or persons with reduced or impaired physical, sensory
or mental capabilities provided that they have been
thoroughly instructed regarding use of the appliance, are
supervised, and understand the risks involved. Children
shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without
supervision. Keep the iron and its cord out of reach of
children less than 8 years of age when it is energized or
cooling down.
• The surfaces which are marked with this sign, the
soleplate and steam cord are very hot during the use
of the appliance. Do not touch these surfaces before
the appliance has completely cooled down.
• Never leave the appliance unattended when it is
connected to the mains. Before storing the appliance,
once it is unplugged, please wait until it has cooled down
(around 1 hour).
• Do not use any descaling products (vinegar, industrial
descaling products, etc.) to rinse the boiler: they may
damage the appliance.
• Before rinsing the boiler/rinsing the anti scale collector
(depending on model), always make sure that the
appliance is completely cooled down and has been
unplugged for at least 2 hours before unscrewing the
boiler rinse cap/or anti scale collector.
• Warning: if the boiler cap or the boiler rinse cap (depending
on the model), is dropped or severely knocked, have it
replaced by an Approved Service Centre, as it may be
damaged.
• Never ll the appliance directly from the tap.
• The lling, or descaling, or rinsing, or inspection apertures
7
that are under pressure, must not be opened during use.
• The appliance must not be used if it has been dropped,
if it has any visible damage, if it leaks, or if it functions
abnormally in any way. Do not attempt to dismantle
your appliance: have it examined at an Approved Service
Centre to avoid any danger.
• Check the electrical power cord and steam cords for signs
of wear or damage prior to use. If the electrical power
cord or the steam cord is damaged, it must be replaced by
an Approved Service Center to avoid any danger.
• Accessories, consumables and end user replaceable parts must be only
purchased from an Approved Service Centre.
• For your safety, this appliance conforms to all applicable regulations (Low
Voltage Directive, Electromagnetic Compatibility, Environment, etc).
• Your steam generator iron is an electrical appliance: it must be used under
normal conditions of use. It is designed for domestic use only.
• It is equipped with 2 safety systems:
– a pressure release valve designed to avoid excessive pressure. In the event
of malfunction, the valve releases excess steam.
– a thermal fuse to avoid overheating.
• Always plug your steam generator iron:
– into a mains circuit with voltage between 220 V and 240 V (Alternating
current only),
– a socket outlet with an earth connection.
Connecting to the wrong voltage may cause irreparable damage to the
appliance and will invalidate your guarantee.
• Do not use an extension lead. If you accept liability for doing so, only use
an extension lead which is in good condition, has a plug with an earth
connection and is suited to the power rating of the appliance.
• Completely unwind the power cord before plugging into an earthed
socket outlet.
8
• The soleplate of your iron, the steam cord, and the iron rest on the base
unit can reach extremely high temperatures, and can cause burns: do not
touch them. Never touch the electrical power cords with the sole plate of
the iron.
• Always use a vented/mesh ironing board to prevent water spots on clothes
and to avoid hot steam venting sideways.
• Your appliance emits steam, which can cause burns. Always handle the iron
with care, especially when ironing vertically.
Never direct the steam towards people or animals. Never iron clothing on a
person, always use a hanger. Never iron in a seated position with your legs
under the iron board.
• Never immerse your steam generator iron in water or any other liquid.
Never place it under a running tap.
What water to use?
Your appliance has been designed to function using untreated tap water.
If your water is very hard, we recommend you use a mix of 50% untreated
tap water and 50% distilled water available in hardware stores.
• Types of water not to use:
Heat concentrates the elements contained in water during evaporation.
The types of water listed below may contain organic waste, mineral or
chemical elements that can cause spitting, brown staining or premature
wear of the appliance: water from clothes dryers, scented or softened
water, water from refrigerators, batteries, air conditioners, rain water,
boiled, ltered or bottled water. These types of water should not be used
in your TEFAL iron. Also only use distilled water as advised above.
Always remember:
Never use rainwater or water containing additives (like starch, fragrance
or water from domestic appliances). Such additives can aect the steam
properties and at high temperature, form deposits in the steam generator
chamber which are likely to stain your washing and lead to premature
aging of the appliance.
9
PLEASE RETAIN THIS INSTRUCTION
BOOKLET FOR FUTURE REFERENCE
Environment protection rst !
Your appliance contains valuable materials which can be
recovered or recycled.
Leave it at a local civic waste collection point.
1 Scale collector
2 Steam trigger
3 Lock system
4 Water tank
5 Flush accessory
6 Steam cord
7 Control panel
1
7
www.tefal.com
STEAMBOOST
2
3
4
5
6
12
USING YOUR APPLIANCE
2.1 Gettingstarted
• Unlock your steam
generator.
Express Protect is
equipped with a lock
system to hold the iron
onto the base for easy
transport and storage.
• Completely unwind the
power cord and take
the steam cord out of its
storage space.
13
USING YOUR APPLIANCE
• Plug in your steam
generator.
• Fill the water tank with
tap water up to the max
indication. Put the tank
back into the appliance
by pushing in until it
locks into place.
• Always ensure that the
base unit is positioned
close enough to the
ironing surface to avoid
straining and wear of the
steam cord.
14
USING YOUR APPLIANCE
• Press the «ON-OFF» button
on the control panel.
• The «ON-OFF» and the
«Normal» button light
remain ashing while the
appliance is warming up.
OK
ON
• To obtain steam, press
the steam trigger under
the iron handle. The
steam will stop a few
seconds after you release
the button.
• The steam generator is
ready for use. The mode
can still be switched even
when the light ashes.
After around 2 minutes,
the light of the selected
setting ECO / NORMAL /
VERTICAL STEAM remains
lit.
2min
max
15
USING YOUR APPLIANCE
• To release even more
steam, press the steam
trigger under the handle
three times in quick
succession for automatic
sequential steam.
WARNING: Remember
that the soleplate
remains very hot and can
burn.
NO
OK OK
During ironing do not
leave the iron faced
down on the soleplate
or resting on the ush
accessory. For your
safety, place the iron
on the steam generator
base or on its heel.
NO
16
2.2 Filling the
water tank
• Switch o and unplug
the appliance.
• Fill it with tap water
without exceeding the
MAX indicator.
• Push it back into its
housing until you hear a
«click».
• Remove the removable
water tank using the
handle located at the
front of the steam
generator
USING YOUR APPLIANCE
17
• Plug in the appliance.
• Press the «ON-OFF»
button to restart the
appliance.
USING YOUR APPLIANCE
ON
18
2.3 Transportation
Your steam generator
is equipped with a lock
system to hold the iron
onto the base for easy
transport and storage
To transport your steam
generator using the
handle of the iron:
— Put the iron on the
steam generator base
and lift the lock system
over the iron until it
locks into place and you
hear an audible click.
— Hold the iron by the
handle to transport your
steam generator.
USING YOUR APPLIANCE
19
USING YOUR APPLIANCE
Changing modes
• Press the « MODE »
button located on the
control panel to go from
one setting to another.
2.4 Settings
20
• When you press the
MODE button to change
mode, the light of the
new mode ashes while
the steam generator is
adapting temperature
and steam to the new
setting. The steam
generator is ready when
the light stops ashing.
USING YOUR APPLIANCE
|
Код: 155934 Извините, товара сейчас нет в наличии
Бесплатная доставка Извините, товара сейчас нет в наличии Сравнить Новости интернет-магазина «Лаукар»:23.04.2025 26.02.2025 17.02.2025 Дополнительная информация в категории Утюг с парогенератором:Утюги с парогенератором — словарь терминов Таблица Авторизованных сервисных центров по брендам. Описание Инструкция Отзывы (0) В интернет-магазине бытовой техники «Лаукар» Вы можете скачать инструкцию к товару Утюг с парогенератором Tefal SV9202E0 совершенно бесплатно. Все инструкции, представленные на сайте интернет-магазина бытовой техники «Лаукар», предоставляются производителем товара. Для того чтобы скачать инструкцию, Вам необходимо нажать на ссылку «скачать инструкцию», расположенную ниже, а в случае, если ссылки нет, Скачать инструкцию Смотреть инструкцию 
Фирма-производитель оставляет за собой право на внесение изменений в конструкцию, дизайн и комплектацию товара: Утюг с парогенератором Tefal SV9202E0. Пожалуйста, сверяйте информацию о товаре с информацией на |
Парогенератор Tefal Express Protect SV9202E0
5 Отзывов
209 990₸
149 990₸
5 Отзывов
Избранное
Сравнение