Парогенератор tefal express protect sv9201e0 инструкция

Choose a board that is height-adjustable to adjust it to your height. It should be steady and robust so that you can place the ironing appliance on it.
The board should be perforated to allow the steam to pass through the fibres of the fabric to soften it and make ironing easier. The ironing board cover should also be suitable to allow the flow of steam through.

To avoid damaging the soleplate, follow this advice:
• Always place your iron on its heel rest or its base (depending on model).
• Avoid ironing over abrasive items (buttons, zip fastenings, etc.).
• Never clean your iron’s soleplate with abrasive or metallic pads.

Shiny marks can appear on some fabrics, especially on dark coloured fabrics. We would advise ironing dark clothes inside out and using the correct temperature.
If ironing mixed-fibre fabrics, set the temperature for the most fragile fibre.
Important: The iron takes longer to cool down than to heat up. We recommend that you start with fabrics to be ironed at a low temperature.

• Untreated tap water:
Your appliance has been designed to use untreated tap water.
If your water is very hard, mix 50% untreated tap water and 50% distilled water.

• Types of water not to use:
Heat concentrates the elements contained in water during evaporation. The types of water listed below may contain organic waste, mineral or chemical elements that can cause spitting, brown staining or premature wear of the appliance:
— water from clothes dryers
— scented or softened water
— water from refrigerators, batteries, air conditioners
— rain water
— boiled, filtered or bottled water

In order to ensure the best performance from your iron, these types of water should not be used for ironing.

The steam is more or less significant depending on the temperature setting of the iron. We advise you to use steam occasionally when the temperature is set low on the iron, otherwise drops of water could appear on your laundry.

Before cleaning, ensure that the appliance is unplugged and that the soleplate and iron rest plate are cold.
Do not use any detergents or descaling products to clean the soleplate or base unit. Never hold the iron or its base unit under tap water.

• Cleaning the base unit:
Clean the plastic parts from time to time with a soft, slightly damp cloth.

• Cleaning the scale collector:
Wait until the appliance has been switched off for at least 1 hour.
Remove the scale collector by lifting and rotating the flap a quarter turn.
Rinse the scale collector under the tap and put it back on the iron.

• Self-cleaning of the soleplate (depending on model):
When the anti-calc indicator blinks, perform the steps described in this video.

It is normal. Your iron generates a lot of steam; this steam is condensing on the board. Some waterdrops could appeared underneath the ironing board and fall on the flooring.

• You are using chemical descaling products or additives in the water. You should never put these products in the water tank. If this is the case, contact an approved service centre.
• Your washing has not been rinsed sufficiently or you are ironing a new item of clothing before washing it. Ensure that you have rinsed your clothes thoroughly in order to to remove soap deposits or chemicals from new garments which could stick to the iron.

• Your iron is too hot, see our recommendations on temperature control settings in your product manual.
• You are using starch. Only spray starch on the reverse of the fabric to be ironed.

Some laundry starches and synthetic fibres may stick to the surface of the iron. Please clean the Iron’s surface.

The internal parts may make metallic noises with the change in temperature. There is nothing wrong with it.

After following the instructions in the user manual for starting the appliance, make sure that your electrical socket is working by plugging another appliance. If it still does not work, do not try to dismantle or repair the appliance yourself, instead, take it to an approved repair centre

Do not use your appliance. To avoid any danger, have it replaced by an approved repair centre.

No, it is normal to have noise and vibration when the steam is activated. The use of steam triggers the functioning of an electric pump.

If the temperature of your iron is adjustable (depending on the model), use steam occasionally when the temperature is set low on the iron.

The temperature is set too low on your iron, it does not allow you to have steam.

Yes, this is quite normal. The water flow allows the cleaning of the soleplate interior.

The self-cleaning operation of the soleplate has to be performed. Refer to the chapter «Maintenance and cleaning», «How to descale my steam generator?».

Yes, this is quite normal. The self-cleaning operation causes the electric pump to operate.

No. The two cables are separately insulated; they are protected and rigorously checked. However, if you notice that the cable is damaged, have it repaired by an approved repair centre.

This system prevents the soleplate from clogging. Its active coating eliminates fibres and impurities that often become stuck to the plate and end up reducing its glide.

Your appliance contains valuable materials which can be recovered or recycled. Leave it at a local civic waste collection point.

Please go to the “Accessories” section of the website to easily find whatever you need for your product.

Find more detailed information in the Guarantee section of this website.

If you believe that one part is missing, please call Consumer Services Center and we will help you find a suitable solution.

S

• SV5020
• SV5030
• SV5030E03
• SV6010E0
• SV60202
• SV6020E0
• SV6035
• SV6035 Fasteo
• SV6038
• SV6038E0
• SV60402
• SV6040E0
• SV6050
• SV6115
• SV6116E0
• SV6130E0
• SV6131
• SV6140
• SV6140E0
• SV7010
• SV70202
• SV7020E0
• SV7030
• SV7030E0
• SV7030 Liberty
• SV7040
• SV 7040E0
• SV7041
• SV7041E0
• SV 7111E0
• SV 7112E0
• SV7120E0
• SV7130
• SV8001
• SV8010 Anti-Calc
• SV8011
• SV 8011E0
• SV8012
• SV8014
• SV8022E4
• SV8030E0
• SV 8052E0
• SV8053E0
• SV8054E0
• SV80553
• SV8055 Anti-Calc
• SV8055E0
• SV8060E0
• SV8062E0
• SV8151
• SV9201E0
• SV9202E0
• SW310612
• SW3201
• SW3201122
• SW3218
• SW3218122
• SW3226
• SW3226122
• SW3238123
• SW3241123
• SW341031
• SW341112
• SW341312
• SW341512
• SW3418 Snack Time grijs
• SW3600
• SW3703102
• SW3703122
• SW3703322
• SW 3703333
• SW37042
• SW3713122
• SW3721122
• SW3731122
• SW3751362
• SW3771122
• SW3781122
• SW3791162
• SW60102
• SW6010252
• SW6010332
• SW6010352
• SW6010802
• SW602032
• SW6020332
• SW6020622
• SW6020632
• SW6020822
• SW6025122
• SW6048122
• SW6058162
• SW6058333
• SW606812
• SW614831
• SW 701110 Multiplates Snack XL 2w1
• SW852D
• SW852D27
• SW853D123
• SW854D16 Snack Collection 4w1

For additional support and resources for the Tefal Express Protect SV9201 steam cleaner, you can visit the Tefal website (www.tefal.com) or the Calor website (www.calor.fr). These websites provide valuable information, such as FAQs, troubleshooting guides, and user manuals, that can assist you in using and maintaining your Tefal Express Protect SV9201 steam cleaner. Additionally, you can contact the customer support team of Tefal or Calor for further assistance. They will be able to address any specific questions or concerns you may have regarding the Tefal Express Protect SV9201 steam cleaner.

To ensure the safety of using the Tefal Express Protect SV9201 steam cleaner, follow these steps:
1. Read the safety and use instructions: Before using the steam cleaner for the first time, carefully read the «Safety and use instructions» booklet provided with the product. This will provide important information on how to safely operate the steam cleaner.
2. Check the model-specific instructions: Depending on the model of the Tefal Express Protect steam cleaner, there may be specific instructions or differences in usage. Refer to the user’s guide for your specific model to ensure you are following the correct instructions.
3. Prepare the steam cleaner: Before using the steam cleaner, ensure that it is properly assembled and all attachments are securely in place. Check that the water tank is filled with clean water according to the instructions.
4. Use the steam cleaner in a well-ventilated area: It is important to use the steam cleaner in a well-ventilated area to prevent the buildup of steam and moisture. Open windows or doors to allow for proper ventilation during use.
5. Follow the operating instructions: Follow the step-by-step operating instructions provided in the user’s guide. This includes turning on the steam cleaner, adjusting the steam output, and using the appropriate attachments for different surfaces.
By following these safety guidelines and operating instructions, you can ensure the safe and effective use of the Tefal Express Protect SV9201 steam cleaner.

To activate the steam boost feature on the Tefal Express Protect SV9201 steam cleaner, follow these steps:
1. Locate the steam boost button: Look for a button or control on the steam cleaner that is specifically labeled as the steam boost button. It may be marked with an icon or text indicating its function.
2. Press and hold the steam boost button: Once you have located the steam boost button, press and hold it down. This action will activate the steam boost feature.
3. Release the steam boost button: After pressing and holding the steam boost button for a few seconds, release it. The steam boost feature will remain active for a certain period of time, providing a more powerful steam output.
4. Use the steam boost as needed: With the steam boost feature activated, you can now use it as needed during your cleaning tasks. Simply press the steam trigger or control to release bursts of steam with increased power.
By following these steps, you can easily activate the steam boost feature on the Tefal Express Protect SV9201 steam cleaner and enjoy the benefits of enhanced steam cleaning performance.

To operate the Tefal Express Protect SV9201 steam cleaner, follow these step-by-step instructions:
1. Read the safety and use instructions: Before using the steam cleaner, carefully read the safety and use instructions provided in the booklet.
2. Prepare the steam cleaner: Ensure that the water tank is filled with clean water. Connect the power cord to a suitable power outlet.
3. Turn on the steam cleaner: Locate the power switch or button and turn on the steam cleaner. Wait for it to heat up, which may take a few minutes.
4. Adjust the steam output: Depending on your cleaning needs, you can adjust the steam output level using the control dial or buttons provided. Refer to the user’s guide for specific instructions on adjusting the steam output.
5. Attach the desired accessory: Choose the appropriate accessory for the surface you want to clean, such as a brush or nozzle. Attach it securely to the steam cleaner according to the instructions.
6. Start cleaning: Hold the steam cleaner with a firm grip and press the steam trigger or button to release steam. Move the steam cleaner slowly and steadily over the surface, applying steam as needed.
7. Refill the water tank if necessary: If the water level in the tank becomes low during use, switch off the steam cleaner, unplug it from the power outlet, and refill the water tank with clean water. Wait for the steam cleaner to heat up again before continuing.
8. Turn off and store: Once you have finished cleaning, switch off the steam cleaner and unplug it from the power outlet. Allow it to cool down before storing it in a safe place.
By following these step-by-step operating instructions, you can effectively use the Tefal Express Protect SV9201 steam cleaner for your cleaning tasks.

The Tefal Express Protect SV9201 steam cleaner manual does not provide specific instructions or differences in usage for different models of the Tefal Express Protect steam cleaner. The manual is applicable to the Tefal Express Protect SV9201 model and does not mention any variations or specific instructions for other models. Therefore, the operating instructions provided in the manual can be followed for the Tefal Express Protect SV9201 steam cleaner without considering any model-specific differences.

Yes, the manual of the Tefal Express Protect SV9201 is available in English .

Появились вопросы о товаре?

Появились вопросы о товаре?