Корпус zalman t8 инструкция

Картинка с сайта: manualspro.net

ZALMAN T8 ATX Mid Tower Computer Case

Precautions

• Read this manual carefully before installing.
• Check the product and components before installing. If you find any abnormality, contact the location where you purchased the product for a replacement or refund.
• Wear gloves to prevent accidents when installing the product.
• Severe damage may occur when mounting the system, so do not apply excessive force.
• Connecting the cable incorrectly may cause a fire due to a short circuit. Make sure to refer to the manual when connecting the cable.
• Be careful not to block the ventilation hole of the product when using the system.
• Avoid locations with direct sunlight, water, moisture, oil, and excessive dust. Store and use the product in a well-ventilated location.
• Do not wipe the surface of the product using chemicals. (organic solvents such as alcohol or acetone)
• Do not insert your hand or another object into the product during operation, as this may injure your hand or damage the object.
• Store and use the product out of children’s reach.
• Our company assumes no responsibility for any problem that occurs due to the use of the product for purposes other than its designated purposes and/or the carelessness of the consumer.
• The exterior design and specifications of the product are subject to change without prior notice to consumers for quality improvement.

Specifications

Картинка с сайта: manualspro.net

Картинка с сайта: manualspro.net

Accessories component

Картинка с сайта: manualspro.net

1/O Ports

Картинка с сайта: manualspro.net

Картинка с сайта: manualspro.net

Installations

1. Removing the side panels

   

   Картинка с сайта: manualspro.net

2. Removing the front panel

3. Foot Pads Installation

4. Mounting the motherboard

   

   Картинка с сайта: manualspro.net

5. Motherboard size

6. ATX

7. mATX

8. Mini-lTX

   

   Картинка с сайта: manualspro.net

9. Mounting PCI-E(VGA) card

   

   Картинка с сайта: manualspro.net

10. Mounting the ODD

    

    Картинка с сайта: manualspro.net

11. Mounting the 2.5″ SSD

    

    Картинка с сайта: manualspro.net

12. Mounting the 2.5″ SSD

    

    Картинка с сайта: manualspro.net

13. Mounting the 3.5″ and 2.5″ SSD / HDD
    Note
    Please check the HOD size before installing. HOD higher than 25.4mm may not be
    properly installed in the HDD cage.

    

    Картинка с сайта: manualspro.net

    

    Картинка с сайта: manualspro.net

14. Mounting the PSU

    

    Картинка с сайта: manualspro.net

15. Mounting the radiator

16. Mounting the front radiator

  * 120mm / 240mm
2. Mounting the rear radiator
  * 120mm

1. Mounting the fans
2. Mounting the front fans

  * 120mmx2/140mmx2
2. Mounting the rear fan
  * 120mm
3. Mounting the side fan
  * 120mm

1. Fan(s) Included / Fan Specifications

   

   Картинка с сайта: manualspro.net

   Rear

   • Dimensions: 120 x 120 x 25(H)mm
   • RPM: 1,100 ±15%
   • Fan: DC 12V 0.15A±20%
   • Sleeve Bearing
   • Power Connector: FAN-3PIN

2. I/O Connectors

   

   Картинка с сайта: manualspro.net

Certification

This mark, designed by Zalman, indicates product compliance with the European
Union’s RoHS (Restriction of Hazardous Substances) Directive.

Disposal of Old Electrical & Electronic Equipment
(Applicable in the European Union and other European countries with separate
collection systems). www.zalman.com.

References

• zalman.com
• ANDPRO.RU — интернет магазин компьютерной и офисной техники с выгодными ценами и доставкой

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>